Part Number: ADS112C04 Other Parts Discussed in Thread: ADS1110 , , ADS1114 , ADS1119 , PGA112 Dear TI team,
I went through all comments and what I found is that many engineers switch from ADS111x to ADS112C04. I also belong to it. I mainly did this step…
Hi Andy,
All I can say is every logic analyzer shot you have provided is wrong with respect to I2C protocol. Not once have you shown me where you have correctly addressed the ADS112C04 devices. So let's go back to the scanner. It looks like you are…
Part Number: ADS112C04 Hi ADC experts,
When using ADS112C04 in "continuous conversion mode", it says "In continuous conversion mode, the ADC automatically begins a conversion of the input signal as soon as the previous conversion is completed."…
HI Bob-san, Thank you for your kind support. We will try a method to read data at high speed using the DRDY status (bit 7) of Configuration Register 2 (0x02) in ADS112C04 with a software engineer. Please let us know if there is anything we do not understand…
Part Number: ADS112C04 Hi Team,
For the ADS112C04, are input offset voltage specs referred to the input of the part, or the input of the modulator? Just want to make sure I account for the selected gain factor correctly in calculations. For instance,…
Part Number: ADS112C04 Other Parts Discussed in Thread: ADS1115 Dear Ti Engineers,
I`m planning to use the ADS112C04 for thermocouple (TC) measurement with an automatic power-on and off if the TC is connected or disconnected (See attached Schematic).…
Part Number: ADS112C04 Hello, I'm working with the ADS112C04. I have a device that will at most output 80mV. Therefore, I can tune the PGA gain fairly high to improve resolution and reduce noise. The current output as measured by a volt meter is 50 mV…
Part Number: MSP430FR5994 Other Parts Discussed in Thread: ADS112C04 Hello,
I am trying to read data from a ADS112C04. Therefore I have written functions that basically work like corresponding functions from eusci_b_i2c library but with repeated start conditions…
Part Number: ADS112C04EVM Other Parts Discussed in Thread: ADS112C04 , ADS122C04
Hi, I'm jun hyeob in KOREA,
I wonder that i can use ads122c04 instead of ads112c04 chip on evm.
I mean, if i use jumper to connect the same pin map in evm and ads112c04…
Part Number: ADS112C04 Hi Experts,
Our customer is requesting that we check their ADS112C04 schematic, kindly refer to the details below:
The customer have a space constrained application where they are measuring 3 K-thermocouples and would like to use…