Part Number: ADS42B49EVM Other Parts Discussed in Thread: LMK04808 , LMK04828 , ADS42LB49EVM Hello,
I have two ADS42B49EVM boards one of each revision, and noticed the performance isn't the same under same conditions.
Can anyone highlight the differences…
Jim,
The SAR and Pipeline each have an specific range of frequencies in which they can work. For example Pipeline can usually be found to be used in the range of 10MSPS which theoretically you can sample until 5MHz; nonetheless SARs range from kSPS to…
Part Number: ADS42B49EVM
Heys everyone,
I'm waiting for my ADS42B49EVM to arrive, so I've started researching (codewise) about how to implement the processing of the data adquisition of a certain signal. The thing is that I've been checking the CMSIS…
Other Parts Discussed in Thread: ADS42B49EVM , ADS42B49 , ADS62P49 Hi,
I'm trying to use the TSW1200EVM Rev C with a ADS42B49EVM. I have the ADS424X option selected in the GUI, but my captured signals does not look correct. Is this the correct option…
Part Number: ADS42B49 Hello!
We are going to use the ADS42B49 device in our application. My question is regarding the reference design that are provided in the ADS42B49EVM board schematic.
In the eval board schematic and BOM file the part number of…
Hi Jim,
Thanks for your reply!
I've checked the EVM design file of ADS42B49EVM. But it seems not the amplifier interface as the picture shows below.
My regards,
Luella
Hi Aronii,
Looking at the EVM design schematic (located here www.ti.com/.../ads42b49evm Documents), the CDC was mainly placed on the EVM to allow for the option of internal clocking (see also the optional onboard oscillator) by way of the CDC PLL. The…
Other Parts Discussed in Thread: ADS42B49EVM Heys everyone,
I hope this is the right place to post this kind of question as I've been redirected from the HSADC forum, anyways, I'll cut to the chase.
I'm waiting for my ADS42B49EVM to arrive, so I've…
Other Parts Discussed in Thread: ADS42B49EVM , ADS4249EVM , ADS42B49 , ADS4249 Hi - we have an ADS42B49EVM that we are using with the TSW1400 to capture data. The A channel functions perfectly, but the data coming in the B channel looks almost like it…
