• RE: SN74AVC16244: SN74AVC16244DGGR VIH/VIL

  

  Chen Alex1

  hi sir i see your reference design is use the SN74AVC16244 between ADS4122 & MCU ads4122 schmatic.pdf

  • 4 months ago
  • Logic
  • Logic forum

• RE: ADS4126: Can the ADS4126 clock be provided from an FPGA PLL?

  

  jim s

  Hassan, Just make sure the device signals do not exceed the absolute max specified in the data sheet. I would suggest you target the typical specs that the TI sheet shows. TI offers many clocking devices that may work for you. Contact the high speed…

  • over 4 years ago
  • Data converters
  • Data converters forum

• ADS4149EVM: ADS4149EVM schematic pinout for connector J10 does not match with HSMC-ADC-BRIDGE REV C schematic

  

  soumya roy

  TI Thinks Resolved

  Part Number: ADS4149EVM Other Parts Discussed in Thread: HSMC-ADC-BRIDGE , 2063.ADS41XX-58B18-SCH_A.pdf 3326.HSMC-ADC-BRIDGE_RevB_sch.pdf Hello, I am trying to connect ADS4149EVM with Altera Cyclone-IV EVM board using HSMC-ADC-BRIDGE. But when I…

  • over 5 years ago
  • Data converters
  • Data converters forum

• RE: ADS41B29EVM: ADS41B29EVM

  

  jim s

  ADS41XX-58B1X-SCH_B.pdf Michael, The schematic is attached. Regards, Jim

  • over 7 years ago
  • Data converters
  • Data converters forum
Answered

• Altera DE2-115 board compatibility with TI's high speed ADC EVMs

  

  Lorenzo Columbo

  Resolved

  Other Parts Discussed in Thread: HSMC-ADC-BRIDGE , ADS58B19 , ADS5474EVM , ADS5474 , ADS6149 , ADS5517 , ADS5444 , ADS5440 , ADS5463 , ADS58B18EVM , ADS58B18 I've already got an Altera DE2-115 board (with an HSMC interface available) and I'm planning…

  • Resolved

  • over 14 years ago
  • Data converters
  • Data converters forum

• RE: ADS4149: SEN reference

  

  jim s

  Harley, I would recommend you use one GND plane for your board. For the ADC discrete signals, I would suggest to drive the signals with a device that supports either 1.8V or 3.3V CMOS logic levels. Using only one GND plane will be easier to route and…

  • over 6 years ago
  • Data converters
  • Data converters forum

• RE: ADS4149EVM: I'm not good at using the ADC, so I'd like to ask you about the approximate usage.

  

  jim s

  Minjae, 1) When connecting through TSW1400EVM and ADS4149EVM LVDS terminals, should both the Capture Board and ADC be connected to USB? Also, do I have to apply a clock to both ADC and Capture Board? Both boards need a USB connection as they both have…

  • over 4 years ago
  • Data converters
  • Data converters forum

Didn't find what you are looking for? Post a new question.