Yahong,
The IBIS models were just for the io pins and did not include the sample clock and analog pins and vcm. But the datasheets had detailed schematic representations of the clock and analog inputs suitable for a spice or Tina simulation so these…
Other Parts Discussed in Thread: ADS6128 , DAC3161 , TLV0834 Hi,
My customer is using TLK3101. He is selecting ADC and DAC at previous and subsequent stage of TLK3101 now.
He selected ADS6128 and DAC3161. Can these IC use with TLK3101?
I think ADS6128…
ALB,
Is your EVM a Rev C board? If so I have attached the schematic. Please make sure all jumpers are set per the board photo I am sending. Take a scope probe (diff probe would be better) and monitor the ADC input across R21 and R26. You should see…
Jin,
The schematic looks good for the most part. Please do the following:
1. Install R364 to provide a path to GND.
2. Do not use R361, R362, and R363 wit the ADC_VCM output.
3. Make sure DRVDD and AVDD are 3.3V.
4. Do not need to route ADC_CLKOUTM_F…
Hello Jim,
Apologies for the late reply. I have been traveling and have now just starting to catch up to all the E2E questions.
The revision C of the schematic is attached. The major change on this revision is that we have replaced U15 from a 16-bit…
