Part Number: ADS7866 Other Parts Discussed in Thread: ADS7867 Hi Dear expert
Would you please share the IBIS model of ADS7866IDBVR?
thanks a lot!
BR,
Joyce
Other Parts Discussed in Thread: ADS7866 Can the ADS7866 be interfaced to a 8bit SPI interface where SCLK clocks out the first 4 MSBs and then pauses and then clocks out the 8 LSBs? Or does the SCLK need to have contigous clock cycles for 16 clock pulses…
- DMALEVEL can only be used for the external DMA trigger. Internal DMA triggers need to be used in edge trigger mode (see errata sheet)
- The eUSCI has some problems with DMA - sometimes it simply fails to get the trigger and the communication ceases…
Hi Darrell,
All of the above, plus whatever noise might be on your power supply as that is used for the reference in the ADS7866. Yes - noise from the bridge would be amplified by an amplifier tied to the ADS7866, but depending on the amplifier used it…
Part Number: DAC081S101 Other Parts Discussed in Thread: ADS7866 , AMC7891 Hi Team, I have customer inquiry below: The customer wants to use an 8 Bit ADC with SPI output to directly connect to an 8 BIT DAC with SPI input to form what will essentially be an…
Other Parts Discussed in Thread: ADC121S051 , ADCS7476 , ADC121S101-Q1 , ADS7883 , ADC121S101 , ADC121S021 , ADS7886 , ADS7866 Hello,
I would like to find out the process technologies (CMOS IC processing) for the following parts:
ADS7866, ADS7883, ADS7886, ADCS7476…
Hi SrinivasaRao, Sorry modified, after checked your schematic and program: 1. It needs 16 clocks to get the data, not 8 in the program. 2. SPI should work at CPOL = 1, CPHA = 1 mode.
3. ADS7866 can only support 200ksps sampling rate,I'm not sure 1MHz speed…
