Other Parts Discussed in Thread: ADS8344 Hello.
I'm using ADS8344 to digitize signals from the pressure sensors.
After assembly, to assess the quality of the board histogram of codes was obtained:
The resulting histogram has many peaks that occur in…
Other Parts Discussed in Thread: ADS8344 Hi,
I have encountered the case of an ADS8344NB sourcing seemingly too much current. The symptom was that the 5V supply sourced by a linear regulator was collapsing until I disconnected pins 10, 11, 12 and 20 of…
Other Parts Discussed in Thread: ADS8344 , TMS320F28335 Hi,
I'm using an ADS8344 in external clock mode, no power-down between conversions.
It seems the very first control bits after power-up of the device are not followed by a correct conversion output…
Other Parts Discussed in Thread: ADS8344 , REF5030 , REF3330 Hello.
I have two design with ADS8344 and the output creates a lot of noise / jumps, app 64 counts.
The other thing is that the output jumps at 16 count and only gives 2, 4, 6 etc in the last digit…
Hi Tim,
In your original post, you mentioned that the ADS8344 came 'standard on the micro-controller board'. Is this some sort of commercially available eval setup? Can you let us know more about it?
Other Parts Discussed in Thread: ADS8344 Dear all,
We’ve got a question concerning the use of TI ADS8344NB 16-Bits Analog to Digital Converter.
In our design, the ADS8344 is used to monitor a few thermal sensors and the board power supplies (3.3V…
Other Parts Discussed in Thread: ADS8344 , ADS8345 Hi,
I'm french, i'm also trying to communicate with ADS8344 using NI-8451 and LabView, did you success to do it ? And can you help/explain me ?
Best Regards,
Olivier
Other Parts Discussed in Thread: ADS8344 , REF02 Hi,
I my application i need to measure RPM from the pulse meter output 4-20ma. i am using ADS8344 16-bit adc and 250 ohm resistor for converting 4-20ma to 0-5v. I am using REF02,5V voltage reference,IC for…
Part Number: AM625-Q1 Tool/software: Hi ,
We are trying to bring up MCASP 2 lines for audio codec on AM6254-Q1 similar to EVM .
Only change is we are using 0x18 address and mcasp2 .
Aplay command exits after playing audio in EVM but in our board after…
Part Number: DAC8554 Other Parts Discussed in Thread: ADS8344 , DAC8568 , Hi team,
I am writing to confirm if we have Linux driver for DAC8554, DAC8568 or ADS8344. Customer want to change DAC and no need to re-write driver code.
Thanks a lot.
