AM1808 is a ARM only variant of OMAPL138. The OMAPL138 LCDK platform is the only TI supported evaluation HW for this family. The OMAPL138 is a ARM+DSP variant but the linux software will run on the device with no changes as the devices a pin, memory and…
Part Number: AM1808 Hi Team,
My customer is use the VS2005 develop and enter debug simulation , but he found that if the red area is operated with 32MB, a memory error message will be generated(Even if the program memory (total) is set to 62MB, it cannot…
Part Number: AM1808 Our customer would like to use PI0 and SPI1, UART0 to UART2, I2C0, RMII on AM1808.(Please refer to Pin set up) When they set MDIO CLK and MDIO D of RMII, Chip Select 0 (SPI0_SCS0) and Chip Select 1 (SPI0_SCS1) cannot be selected in SPI0…
Part Number: AM1808
Hi Sitara support Team,
Please let me know if the OCD function of DDR2 is used or not in AM1808.
Reference Manual for AM1808 "OMAP-L138C6000DSP+ARMProcessor (spruh77)": page 408, "15.2.13 Auto-Initialization Sequence" states…
Part Number: AM1808 1.On my board, AM1808 I2C0 chain has 7 devices, and the test finds that the start position of SCL/SDA rising edge oscillates , as shown in Figure 1.
2.Then, I made I2C0 only direct to one slice EEPROM by flying lines and found that…
Part Number: AM1808 Hi Team,
My customer engineer had some issue which is refer to the screen image as below;
It seems to lose some file or develop tool , so they can not to done. Please help to check or provide this file if you have on hand. Thanks…
Part Number: AM1808
Hi Expert,
The lastest release(2013) Linux version is 2.6 in TI website, now we need to update linux kernel, the solution is using linux 4.19 which is from OMAPL138 Linux PSDK (ti-processor-sdk-linux-omapl138-lcdk-06.03.00.106 ), we…
Part Number: AM1808 Hi
I'm referring the following errata "Advisory 2.3.3"
www.tij.co.jp/.../sprz313h.pdf
I'd like to know more about above yellow sequence.
Which value should be set to which register for it?
Thanks and Best regards…
