Part Number: LINUXEZSDK-AM1810 Other Parts Discussed in Thread: AM1808 , OMAP-L138 Hello,
Which of the Sitara family of processors should I choose so that I can count on full software support for Linux (the latest LTS kernels - 4.4.236; 4.9.236; 4.14…
Other Parts Discussed in Thread: AM1810 , AM3517 Hi TI engineers!
We are wondering if TI PRU CAN Controller Driver is available or not, in "pru-1.00.00\kernel_loader\can\module" of AM1810?
And if there is latest version for this Driver?
Could anyone…
Other Parts Discussed in Thread: AM1810 , PROFIBUS Hi TI engineers!
Here is another question my team is facing now.
AM1810: Linux 2.6.33.7-rt29
DP: DPSlave_EVAL in am181x_profibus_dpslave_app-04.01.00.00
PLC Profibus Master communicates…
Hi,
I want to check processor is reset by normal reset or by watchdog register(WDTCR).
In data sheet is given that if processor is reset by watchdog(i.e watchdog timeout) than in WDTCR WDFLAG bit is set means WDTCR value is 00008000 because WDFLAG…
Other Parts Discussed in Thread: AM1810 Hi, professionals! We need your help again.
The case is as follows:
We made 3 AM1810 developing boards in one batch by SMT, and two of them works well, but for one board no "Boot me" was printed out.
…
Other Parts Discussed in Thread: AM1810 , OMAP-L138 Hi Professionals! My team met a problem again. On our AM1810 developer board, we are going to provide digital clock signal excitaion for FPGA chip by digital output of pin of CLKOUT/UHPI_HDS2/PRU1_R30…
Other Parts Discussed in Thread: AM1810 , OMAPL138 Hi professionals! I am wondering if there is an unique ID for AM1810 chip or anything that is unique globally and thus I can use to identify this chip?
If yes, how can I read it from the chip?
Thank…
Other Parts Discussed in Thread: AM1810 Hai,
We were using Sitara AM1810 processor, for this we interfaced DDR2 of 128MB .
When we power the board we were seeing "BOOTME" message on the console
Then we compiled the u-boot for AM1810 with the below…
Other Parts Discussed in Thread: OMAP-L138 , AM1810 , AM1808 , OMAPL138 , PROFIBUS Is AM1810 pin to pin Compatible to OMAP-L138?
I found AM1808 is pin to pin Compatible to OMAP-L138. but I am confused about AM1810.
thanks!
Other Parts Discussed in Thread: AM1808 , AM1810 , SEGGER , PROFIBUS I am using a MCU AM1808 and it works fine. Now I try to program a AM1810 by using the same hardware and software (low level SW, some GPIO-tests, etc). Unfortunately I cannot manage the…