Search tips
Showing 35 results View by: Thread Post Sort by
    Answered

  • AM2632-Q1: The Am2632 is warm starting repeatedly are power up with a WARMSTRT reason of 0xC1

    Resolved
    Part Number: AM2632-Q1 Other Parts Discussed in Thread: AM2632 , Tool/software: We are bringing up a new board using the AM2632-Q1. Using CCS with an XDS110 probe I have read the MSS_TOPRCM_SYS_RST_CAUSE (0x5320000C) register after the MCU restarts. We…
    • Resolved

  • AM2632-Q1: AM2632 Heat Dissipation Question

    TI Thinks Resolved
    Part Number: AM2632-Q1 Other Parts Discussed in Thread: DLP2021-Q1 , AM2632 Tool/software: Hi expert, Customer is designing AM263x+DLP2021-Q1, From the measurement, AM263x consumes 0.8A@1.2V and 0.05A@3.3V. Total 0.96W+ 0.165W ~=1.1W. They want to know…

  • AM2632-Q1: ADC and VPP Decoupling

    TI Thinks Resolved
    Part Number: AM2632-Q1 Tool/software: Are the listed decoupling capacitors required for items which will not be implemented? I'm specifically thinking of ADC_VREFHI_Gx (the internal VREF will used) and VPP.
    • Answered

  • AM2632-Q1: Adding QSPI to working project causes the project to ABORT in the QSPI initiailzation code

    Resolved
    Part Number: AM2632-Q1 Other Parts Discussed in Thread: SYSCONFIG Tool/software: I have just migrated our project from MCU SDK 9 to MCU SDK 10.01.00.31 and Syscfg 1.22. The project built and ran as expected. I have ran the project on the Control card…
    • Resolved
    • Answered

  • AM2632-Q1: About measuring pulse period/frequency.

    Resolved
    Part Number: AM2632-Q1 Tool/software: Hello expert. Is it correct to understand the following about measuring pulse period using ECAP module of the AM264x? 5[nS] time resolution x 32-bit data field = Measurable period (max) 21.47[S] / 0.046[Hz] I want…
    • Resolved
    • Answered

  • AM2632-Q1: On-chip flash/ Non-volatile memory in Sitara series MCU

    Resolved
    Part Number: AM2632-Q1 Tool/software: Hello, I had a very basic query on the AM2632-Q1 / Sitara series micro-controllers & wanted to confirm on my query. Do we have an on-chip flash or any non-volatile memory in the series. I have gone through the…
    • Resolved

  • AM2632-Q1: Problem with Syscfg in Code Composer not allowing configuration of multiple channels for a SPI port

    Part Number: AM2632-Q1 Other Parts Discussed in Thread: SYSCONFIG Tool/software: We have a project in code composer for the AM2632-Q1. Attached to a SPI0 are two devices that require different clock phase. The best solution would be to configure the…
    • Answered

  • AM2632-Q1: ECAP Signal monitoring Unit not working as expected

    Resolved
    Part Number: AM2632-Q1 Other Parts Discussed in Thread: AM2632 , , AM2634 , AM2634-Q1 Tool/software: I am following the information from the TRU section 7.4.6.7 I am following the configuration requirements. I have interrupts enabled for the eCAP device…
    • Resolved
    • Answered

  • AM2632-Q1: Sitara Radiation Testing Data Available?

    Resolved
    Part Number: AM2632-Q1 Other Parts Discussed in Thread: AM2632 , TMS570LC4357 Tool/software: Hello, I am looking into using the AM2632 (or other Sitara MCU) for an application in a radiation environment, mainly due to its error detection and correction…
    • Resolved
    • Answered

  • AM2632-Q1: Sitara boot from MRAM

    Resolved
    Part Number: AM2632-Q1 Other Parts Discussed in Thread: AM2632 , TMS570LC4357 Tool/software: Hello, I am looking into using the AM2632 (or other Sitara MCU) for an application in a radiation environment, and one of the main concerns is the corruption of…
    • Resolved

Didn't find what you are looking for? Post a new question.