Search tips
Showing 302 results View by: Thread Post Sort by
    Answered

  • RE: AM263P4: How should OSPI flash reset line connect to AM263P4?

    Resolved
    Andy MacGregor said: Is there another use case where we would need the RWW operation? No Andy, RWW is used primary for OTA application
    • Answered

  • AM263P4: HDLC Communication

    Resolved
    Part Number: AM263P4 Tool/software: Hi Team, We are planning to implement HDLC on the AM263P4 using RS485 transceivers on all UART ports. Besides Tx and Rx, what additional pins are required for implementing HDLC? According to the datasheet, all UART…
    • Resolved
    • Answered

  • AM263P4: Power Estimation

    Resolved
    Part Number: AM263P4 Tool/software: Hi Team, I plan to use all 8 CAN FD ports from the AM263P4 device. How can I estimate the power consumption for all 8 CAN ports operating at 5 Mbps on 3.3V? I haven't noticed a significant change in 3.3V power consumption…
    • Resolved

  • RE: AM263P4: How To "Update The Calibration"?

    Nilabh Anand said: Though there are some consideration which is concerning to me. Given the update will be done to an signed mcelf image, if you update .cinit section you will need to update the hash and the signature also, how would that work. That is…

  • RE: AM263P4: epwm_dma_am263px-cc_r5fss0-0_nortos_ti-arm-clang

    Hi, I have checked the EDMA_CHAIN_TRANSFER and ADC_SOC_CONTINUOUS_DMA examples, but the examples are difficult and I don't know how to modify them to transfer the ECAP results continuously via DMA. Is there any document that briefly explains the…

  • AM263P4-Q1: OCRAM MPU region assignment in sysconfig

    Part Number: AM263P4-Q1 Tool/software: Hello team, Few questions: I noticed that in all the examples OCRAM is defined as a 2 MB with a start address of 0x70000000 and there is no option to change that to 3 MB, should I add another 1 MB region starting…

  • AM263P4-Q1: difference between mmcsd v1 and mmcsd v2?

    TI Thinks Resolved
    Part Number: AM263P4-Q1 Other Parts Discussed in Thread: AM263P4 Tool/software: Dear Champs, I found there are 2 versions(directory) in the mmcsd driver folder of mcu+_SDK_10.1 as below. * v1( \\mcu_plus_sdk_am263px_10_01_00_31\source\drivers\mmcsd\v1…
    • Answered

  • AM263P4: Thermal Manager example in SDK faulty?

    Resolved
    Part Number: AM263P4 Other Parts Discussed in Thread: UNIFLASH , TMDSCNCD263P Tool/software: Hey Experts, ive a question regarding the SDFM module. Iam using: CCS 12.8.1.00005 SDK 10_00_00_35 Uniflash 8.8.1.4983 TMDSCNCD263P PROC159E2 i tried to get the µC temp…
    • Resolved

  • AM263P4: "post-build" fails on examples in sdk 10.1.0.34

    TI Thinks Resolved
    Part Number: AM263P4 Tool/software: Hello All, I am trying to run examples from SDK ver 10.1.0.34 on CCS 12.8.1 However i encounter a post-build failure. (Please see screenshot) How can i resolve this. Thanks a lot, Arjun.
    • Answered

  • AM263P4: PRU-ICSS IEP Clock Sources

    Resolved
    Part Number: AM263P4 Tool/software: In my project I want to verify that the 200MHz SYS_CLK drives the IEP peripheral. In the reference manual "7.3.12.2.1 PRU-ICSS IEP Clock Generation" it says the following. The IEP has a selectable module input…
    • Resolved

Didn't find what you are looking for? Post a new question.