Part Number: AM26C31M NEED A CLARITY IN OUTPUT SIDE VOLTAGE LEVEL .DATA SHEET IS CONFUSING .SIMULATION MODEL IS NOT AVAILABLE FOR THIS PART .I NEED SINGLE ENDED TO DIFFERENTIAL OUTPUT .PLEASE CONFORM THE OUTPUT VOLTAGE (BETWEEN 1Y AND 1Z PIN) WAVEFORM…
Part Number: AM26C31M Other Parts Discussed in Thread: AM26C32 , UCC21755-Q1 , SN65C1167E , pls help me to to finalize the logic .pls reffer attached picture.basic our requirement is to avoid noise and reproduce controller card output 3.3V PWM at end output…
Part Number: AM26C31M Hello,
How can I calculate the poer dissipation of the AM26C31M when there is a short at the output?
Also, if all outputs are shorted, shall I multiply it by 4?
I ask since I need to know whether the device needs a heat sink or…
Part Number: AM26C31M Other Parts Discussed in Thread: AM26C31 , AM26LV31E Hello, I need to know the active output impedance of the following parts:
AM26C31MDREP AM26LV31ESDREP
The datasheet does not state in either case.
I already asked this question previously…
Part Number: AM26C31M Other Parts Discussed in Thread: THVD1500 , AM26LV31 Hello, I need to know the active output impedance of the following parts:
AM26C31MDREP AM26LV31ESDREP
The datasheet does not state in either case.
Hi Takahashi-san,
Our best option, as Clemens also indicated, would be the AM26C31MDREP. Since it is EP it does link to a different page than the AM26C31M without EP does - so the correct page can be found here: https://www.ti.com/product/AM26C31-EP/part…
It's been almost two years since this answer has been posted; is there still no Spice Model for the AM26C32M? Is there a more generalized model for a AM26C32?
Is there any type of PFMEA / FMEA documentation for this component? The only thing I could…
Hi Brian,
You are correct - the AM26C31M device could support this but is unfortunately not available in TSSOP. Would it be possible to use the SOIC version of this device instead?
Regards, Max
I'm sorry I didn't make it clear enough. AM26C31, AM26C31M and AM26LV31E are all line drivers, which has one digital input and differential output for each channel. Therefore Vid (differential input) spec doesn't apply here. If you see Vid on the datasheet…