Hi Himanshu,
Thank you for the detailed reply. I have managed to enable VLAN tagged PRP SV frames. We encountered an issue with root file system mismatch. We were using a previous version of RFS while the SDK was 6.1. We didn't switch to the corresponding…
Part Number: AM3359 Other Parts Discussed in Thread: SYSCONFIG Hi,
I created my devicetree.dtsi from sysconfig application. I created this config from AM335x ZCZ:
DCAN1 -> UART0
GPIO -> GPIO0
LCDC -> LCDC
ETH1 -> GMII1
ETH2 -> GMM2
UART…
Part Number: AM3359 Hi TI team,
I am facing an issue while defining the GPIO direction as output. I am using GPIO2_5 as the LAN PHY reset, which is one of the inputs of the 7UL1T80FU AND logic IC. This pin operates at 1.8V, while the second input and…
Part Number: AM3359 Other Parts Discussed in Thread: AM3352 , TPS65910 Hi,
Kernel got panicas as kernel starts boot ,I am following the below commands to build initramfs kernel image:
cd <Processor SDK>/filesystem/ mkdir initramfs tar xvf arago-tiny…
Part Number: AM3359 Hi,
I want to flash ramdisk image for rasmfs and i need to flash through uart at nand memory .......
and if i possible please mention how to do the same process using initramfs.cpio ...
Part Number: AM3359 Hi,
I was trying to enable CAN in the AM3359 ICE 2.0 EVM.
but i couldn't find any relevant document which mentions the steps to be followed.
I found links for AM335x EVM and followed the steps mentioned but CAN was not enabled. …
Part Number: AM3359 I am using AM3359 Sitara Processor in the design. DDR3L of 1GB density with data lines of x16 is interfaced. It has two I2C, UART and SPI interface and GPMC is used to communicate with NAND Flash, NOR Flash and FPGA (16-bit). It has…