Search tips
Showing 212 results View by: Thread Post Sort by

  • RE: TINA/Spice/AM3894: IBIS model

    Hi Bill, Please update me, if you get it. Actually it's PCIe IBIS model is required. Thanks, Nilam

  • AM3894: Video/Graphic features

    TI Thinks Resolved
    Part Number: AM3894 Hi, This is Stanley from Quanta computer in Taiwan. I'm searching for a graphic/video processor. For AM3894, I've read its specification. And I have some questions. Does AM3894 support the following features? 1. Video resolution…

  • RE: AM3894: [Vatech] can you explain why CS1 is not supported in AM389x

    Bobby, I confirm one more time that AM389x DDR CS1 is NOT supported, DDR CS1 is NOT functional. Bobby Youn said: So they want to know that what issue happens when they use CS1. Most probably, the DDR chip attached to CS1 will not behave properly…

  • Linux/AM3894: HDMI issue

    TI Thinks Resolved
    Part Number: AM3894 Tool/software: Linux Hi, I am wondering if there is any patch that SDOCM00095231 issue is resolved in http://processors.wiki.ti.com/index.php/TI81XX_PSP_04.04.00.02_Release_Notes . There is a problem that HDMI output of AM389x…

  • AM3894: EMAC Receive Threshold Interrupt setup

    Part Number: AM3894 The AM389x TRM (SPRUGX7C) states the following about EMAC Receive Threshold Interrupts: The receive threshold interrupts use the same free buffer count and threshold logic as does flow control, but the interrupts are independently…
    • Answered

  • AM3894: Recovery from HOSTPEND error condition in EMAC

    Resolved
    Part Number: AM3894 The TRM for AM389x (SPRUGX7C) states the following about recovering from a HOSTPEND error condition: A hardware reset is the only means of recovering from the error interrupts (HOSTPEND), which are triggered by errors in packet…
    • Resolved
    • Answered

  • AM3894: Power Consumption 3.3V

    Resolved
    Other Parts Discussed in Thread: AM3894 AM3894: Power Consumption 3.3V: Can you explain to me, why CPU has 66 DVDD_3P3 Pins and requires 64 0.1uF and 7 15uF Capacitors with a 3V3 Power consumption of 19mA (Datasheet) or 24mA (Excel Power Spreadsheet)…
    • Resolved

  • RE: AM3894 DDR3 Init

    Load CCS Open Target Configuration. Launch Selected Configuration - AM3894.ccxml Connect to target. Load GEL-includes only memory map setting. Load *.out file with reset and without "Run to Main" Execute application.

  • Tc parameter on AM3894

    Other Parts Discussed in Thread: AM3894 Hi all, Can you provide the Tc value on AM3894? Because datasheet only describes Tj value. Or have the calculation from Tj to Tc? Thanks in advance. B.R. OC
    • Answered

  • AM3894 booting uImage with microsd

    Resolved
    Hi, Booting device with microsd. U-boot loading is successful, but uImage not loading. U-boot error: Verifying Checksum ... Bad Data CRC ERROR: can't get kernel image! Try booting uImage with TFTP, all right. Microsd create with tool: mksd-ti816x…
    • Resolved

Didn't find what you are looking for? Post a new question.