Part Number: AM4377 We are starting a new RTOS EtherCAT-Slave project on the AM4377 in CCS and would like to use some more recent C++ features than available on the GNU v7.3.1 (Linaro) toolchain. When switching to the GNU v9.2.1 (Linaro) toolchain, everything…
Please post which Linux version you are using on the AM437x.
Please complete this checklist and post the results here: processors.wiki.ti.com/.../5x_CPSW
Part Number: AM4377 I am using an AM4377 in my design, and need to know how much current each GPIO pin can source/sink when VDDSHVx is running at 3.3V; I can't seem to find this information anywhere in the datasheet.
Part Number: AM4377 We are designing a new board based on the Am4377 and start now the development of the firmware. Since TI is switching from TI-RTOS to FreeRTOS for the new Sitara Processors, are there any plans for switching older processors to FreeRTOS…
Part Number: AM4377 hello!
When trying to boot from AM4377 spi norflash (ISSI's 32MB flash.boot code:ti_uboot_201605sdk3205) First use 'uart' or 'emmc' to boot to my BSP stage, flash can be read and write normally. Then write the MLO.byteswap and u…
Part Number: AM4377 Hi,
We are using the AM4377 Sitara Processor with DDR3 SDRAM and have had trouble getting the EMIF consistently working, some boards work and some do not. We have used the SPRAC70A_AM437x_EMIF_Configuration_Tool_V21 to determine…
Other Parts Discussed in Thread: AM4377
In our custom board we use DP83822IFRHBR PHY for EtherCAT. COL pin of the PHY is used to determine the PHY address at PHY reset (strap). There is 3.3 volts at the COL pin during PHY reset when COL pin…
