Part Number: AM5706 Tool/software: Hello TI Team,
Could you please review the PCIe reference clock connection for the AM5706?
My design uses the LJCB_CLK in Output REFCLK mode. The ljcb_clkn / ljcb_clkp pins are intended to provide a HCSL reference…
Part Number: AM5706 Other Parts Discussed in Thread: SYSBIOS Tool/software: Hi, I'm using AM5706 processor and want to trigger and handle the interrupt coming at GPIO5_6 pin. I tried to use the GPIO APIs given in PDK folder(LED blink API) but not getting…
Part Number: AM5706 Other Parts Discussed in Thread: SYSBIOS Hi
We are using the TI AM5706 processor along with the TI provided sysbios RTOS.
Here we are trying to implement the watchdog timer and the timer is working as expected. Processor is getting…
Part Number: AM5706
Tool/software:
Hi, We have a system in which COMe module having Intel atom 3930 processor is defined as Root Complex with Xilinx Artix 7 series FPGA (the COMe module is connected to the PCB with this FPGA), another 2 endpoints…
Part Number: AM5706 Other Parts Discussed in Thread: SYSBIOS , AM69 Support Required for PCIe Performance and Link Stability Issues Between Intel E3930 (RC) and TI AM5706 (EP)
Dear TI Support Team,
Greetings!
Thank you for your previous support…
Part Number: AM5706 TL;DR: I tell you how I fixed early attach on SDK9 for my board. There is not an actual question appart from "why wasn't this supported?"
We're porting our product from SDK 6 (Linux 4.19) to SDK 9 (Linux 6.1) and we have found some…
Part Number: AM5706 Other Parts Discussed in Thread: SYSBIOS We are using ADV7403BSTZ-110 ADC as a part of out FPGA and there are around 37 ADC registers to which I am writing to via I2C. We are also using AM5706 TI Sitara processor which has 5 I2C controllers…
Part Number: AM5706 Tool/software: Hi Team,
Question from customer.
The customer system reads the Bootloader image from SPI flash memory and boots with;
- Toggle sysboot
- To change the boot device (implement QSPI_1 (single SPI flash) in CS2)…
Part Number: AM5706 Tool/software: My query is regarding RGMII interface in AM5279 processor.To acheive the Txc of 0.75ns, what is the recommended trace length of RGMII interface and any termination was included in this measurement ?
Part Number: AM5706 Other Parts Discussed in Thread: SYSBIOS Hi, I am trying to use the MPU WDT in Ti AM5706 processor. For the MPU WDT, I have disabled the reset and only enabled the interrupt so that when the WDT timer runs out, a reset to the processor…
