Part Number: AM5K2E02 Hi Team,
My Customer wanted to know the Max Operating Junction Temperature (TjMax) of AM5K2E02, do we have this value?
Regards, _Renan
Part Number: AM5K2E02 Other Parts Discussed in Thread: AM5K2E04 I would like to simulate the SERDES links of the AM5K2E02 processor. I understand this requires an IBIS AMI model, I couldn’t find this model on the website.
Could you show me where…
Part Number: AM5K2E02 Hello,
The IBIS model for the AM5K2E02 processor does not have a model for the PCIe clock inputs.
Are there any plans to release a model?
Is there a equalivalent model from another device that i can use?
Rick,
It is good to hear that you have robust operation. Some of the values are different from the ones I recommended. Most differences are not significant but some are. Please see the comments below:
/// Setup PLL Control Register. #define C_DDRPHY_PLLCR_INIT…
Part Number: AM5K2E02 Other Parts Discussed in Thread: AM5K2E04 Hi,
We are working on a prototype board with a AM5K2E02 processor. Our current power down sequence is to power down all rails simultaneously when input power is removed.
We have measured the…
Part Number: AM5K2E02 Hi,
We are testing a custom PCB with a AM5K2E02 SOC. We have observed that on boot the DEVSTAT register contains different values for the SYSBOOT pins than were expected. Intended 0's are always registered correctly as 0's. However…
Part Number: AM5K2E02 I'm trying to find some experiences / success stories of teams who have used HPI to communicate between the AM5K2E02 and 6482 DSP. My understanding is that the AM5K2E02 can utilize the on-chip EMIF16 to interface to the 6482 DSP…
Part Number: AM5K2E02 I am still having problems updating the boot parameter table from flash.
Is the BPT stored in flash unadorned i.e.
BPT length (2 bytes) BPT Checksum (2 bytes) .... remainder of BPT
or as a GP BLOb i.e.
BLOb length (4 bytes) target address…
Part Number: AM5K2E02 Hi,
For context, We are testing a custom PCB with a AM5K2E02 SOC. We can connect to the board using CCSv8 and XDS100v2 and are able to load and run basic programs. One of these basic programs reads/writes from the attached NAND flash…