Part Number: LMT01 Other Parts Discussed in Thread: AM62A3 Hello Ti, I am using LMT01 with AM62A3 we are getting following signal on oscilloscope but we are unable to count pulse on GPIO, can you provide driver code for the same, Thank You Abhineet Ranja…
Hi Board designers,
Good to hear on your plan to reuse the SK-AM62-SIP schematics to design the custom board.
Refer below recommendations or guidelines for custom board schematic design improvement.
1. Schematics Reuse guidelines:
Refer below FAQ
https:…
Part Number: AM62A3 Hi all,
the TRM for the AM62A is not very clear about exactly which GPIOx interrupts are mapped to which GPIOx_GPIO_BANK_y interrupts. Is there a clear mapping somewhere?
The TRM contains a Table 10-5 for MAIN_GPIOMUX_INTROUTER0_INTERRUPT_MAP…
Part Number: AM62A3 Hello Ti, We are planning to use LTE IC with AM62A3, can you suggest some Low power LTE-IC with small form factor for Live streaming (4G/5G) over it. compatible in INDIAN cellular network.
Regards
Hi Board designers,
Good to hear on your plan to reuse the SK-AM62A-LP schematics to design the custom board.
Refer below recommendations or guidelines for custom board schematic design improvement.
1. Schematics Reuse guidelines:
Refer below FAQ
https:…
Part Number: AM62A3 Hello, I am streaming video to the display MPIP-DPI but the display resolution is 320 * 240 RGB666 and i want to modify according to this link https://software-dl.ti.com/processor-sdk-linux/esd/AM62X/09_01_00_08/exports/docs/linux/Foundational_Components…
Part Number: AM62A3-Q1 Hi Team,
We would like to change the optimiztion level in u-boot for debugging.
But after this change, we faced the make error. Do you know how to fix this?
Best regards,
Ito
Part Number: AM62A3
Hello Team
We are working on bringing up a DPI display (RGB) on a custom board, am62a3, with communication through SPI.
I have added the DTS node as follows:
SPI0_CSI
SPI0_CLK
SPI0_D0
SPI0_D1
These pins will be connected to the…
Sathiya Narayanan said: I have changed the DDR frequency to 1066MHz in <BUILD_DIR>/<TMP>/work/am62axx-em_oe-linux/u-boot-ti-staging/git/arch/arm/dts/k3-am62a-ddr-1866mhz-32bit.dtsi file in the u-boot.
Can you post your .dtsi file before and…
Part Number: AM62A3 Other Parts Discussed in Thread: TDA4VM
As we know, TI has implemented two sets of SDKs: Edge AI SDK (Runtime API) and Processor SDK demo (vision_apps).
We are using the Processor SDK in our project.
Recently, we encountered…