Hi DH,
So far, I am not able to reproduce the video you have sent me with 10.0 SDK.
I see below on AM67A 10.0 SDK:
Could you go to Panels->Displays and check that box to see if the status is OK for all the streams?
Regards,
Takuma
Part Number: AM67A Tool/software: Hi,
Does the SoC supports OTG on USB0? Looking at the linux device tree it suggests that both USB0 and USB1 supports OTG. But reading the TRM chapter 4.10.4.1 ("USB2SS Unsupported Features") says OTG is not supported…
Hi Daniel,
The AM67A device datasheet (found here ) contains a Pin Attributes table in chapter 5 which lists all the ball numbers, ball names, and the available mux modes for that ball. Ball is synonymous to pin.
Here is a snippet from the datasheet as…
Part Number: AM67A Other Parts Discussed in Thread: AM67 ,
Tool/software:
Hi,
is it possible to source the PCIe REFCLK from the SoCs REFCLK pins? Does it comply with the PCI-SIG spec? I've seen some errata for other TI SoC (AM64xx, e2e.ti.com/.../4…
Part Number: AM67A Other Parts Discussed in Thread: J722SXH01EVM Tool/software: We need an EVB for the AM67A SoC for our development activities of an automotive project. We found the EVB, J722SXH01EVM listed for the device in TI's website. But we need…
Part Number: AM67A Tool/software: Hi Expert,
Could you please provide the AVL of LPDDR4 that AM6X can support? What are the minimum and maximum SIZE of LPDDR4?
Thanks
Daniel
Part Number: AM67A Other Parts Discussed in Thread: AM67 Tool/software: I noticed that there are several different grounds on the AM67A EVB that I am not trusting are actually different considering where they are located in the schematic. In addition…
Hi Michael,
Michael Walle said: I'm not interested in a one-shot pre-compiled binary, instead there should be a pre-compiled binary in the git repository mentioned above with just the management functionaly and no debugging output.
I can file a Jira…
Part Number: AM67A Tool/software: Hi,
We are in the development phase of a new board with the AM67A and we are puzzled about the use case of all the reset inputs and outputs.
There are three inputs:
RESET_REQz
MCU_PORz
MCU_RESETz
And three (corresponding…