Hi Nikhil,
We have another board with a non-TI processor that supports NPU opencv target and application which use TIM-VX backend. So I am trying to figure out how to run this application using TIOVX and AM69 accelerators and compile it with our yocto…
Part Number: SK-AM69 Tool/software: Hello, We are evaluating your SK-AM69 platform. I am working with your Jacinto TDA4/DRA8 platform for a different project (just starting on this project). On the Jacinto, on the R Cores we run safeRTOS (freeRTOS) and…
Hi Takuma Fujiwara ,
Takuma Fujiwara said: However, will these be used at the same time, so there would be need to support both DSI0 and DSI1?
No, these two bridges LT8912B and SN65DSI84 are mutually exclusive and not suppose to be working at the same…
Hi,
? ? said: Ok, but I hope you can help me see why the CPU usage of the kernel is 100% after connecting to the slave?
Can you run htop?
? ? said: Ethercat's inability to stop is still unresolved.
etheractctl stop tries to remove the ec_master without…
Part Number: AM69 Tool/software: Hi AM69 Champ !
I have a question about how to turn off the clock of the unused part of the AM69.
For a customer's product, They are testing the product by raising the temperature to 85 degrees Celsius for environmental…
Part Number: AM69 Tool/software: Hi,
There seems to be some conflicting information about the logic level for the USB0_ID pin on the AM69 processor. In the AM69 datasheet Table 5-1, pin USB0_ID (ALY package: AN17) is listed with an I/O Voltage of 3.3V …
Part Number: AM69
Tool/software:
Hi AM69 Champ !
My customer is going to SMT this week using an AM69 and is asking for a guide to SMT temperature profiles.
I am requesting the temperature profile for the AM69 CPU or the temperature profile used to build…
Part Number: SK-AM69 Other Parts Discussed in Thread: TUSB321 Tool/software: Is it possible to configure any of the SK-AM69 USB ports to be USB slave? If not, can this be achieved by configuring the USB-C port - TUSB321 in UFP or DRP mode? Otherwise…
Part Number: SK-AM69
Tool/software:
Hello!
I'm trying to build custom Linux image with EdgeAI components included to run TIOVX apps. There were problems with remote cores creating IPC channels previously discussed in the related thread, but now it seems…
Hi Joao,
Could you try removing ddc support: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?h=ti-linux-6.6.y&id=118cf0c8b392bed94437f1519de10b63705dbacd
Regards,
Takuma
