Part Number: AM69A Hi,
AM69A uses the Serdes2 TX3 and RX3 lanes to perform QSGMII Ethernet function with YT8614.
After configuring from the reference settings, it cannot access the internet.
The YT8614 driver is provided by the original chip manufacturer…
Part Number: AM69A Other Parts Discussed in Thread: AM69 i have build sdk for am69 with guide https://software-dl.ti.com/jacinto7/esd/processor-sdk-linux-am69/09_02_00_05/exports/docs/linux/Overview_Building_the_SDK.html I have successfully built the…
Part Number: AM69A
Hi E2E Team,
We are currently bringing up a custom board based on the AM69A processor connected to a Marvell MV88E6393X Ethernet Switch IC via SGMII (1G mode), but we are facing periodic packet drops and temporary disconnections…
Part Number: AM69A Other Parts Discussed in Thread: AM67 , , AM69
I’m developing the secure boot feature for the AM69A, but I can’t find the documentation for it. Most of the documents I found are for the AM62, AM64, and AM67. Could you…
Part Number: AM69A
currently i am able to infer after generating artfacts but FPS and threwput is not up to the mark i was reading to the repo and then found this https://github.com/TexasInstruments/edgeai-tidl-tools/blob/master/docs/tidl_fsg_multi_c7x…
Part Number: AM69A
Hello,
We've developed our custom board using the AM69A and managed to boot. To proceed, we need to optimize the power consumption of AP.
I'm sharing results of k3conf commands on my board. 1. k3conf dump processor : dump_processor…
Part Number: AM69A Other Parts Discussed in Thread: AM69 , TUSB8041 , TUSB8044 , TUSB8044AEVM We can see the TUSB8041 on the EVM, as shown in the image below.
And then, insert the same SD card into our board.
However, on our own board, we use the…
Part Number: AM69A Hi
Customer are evaluating the A72 performance level, and they have establish some AI demo on AM69A before.
Currently they are eavaluting the A72 handle the decoding performance, such like the barcode algritym running on A72 core…
Part Number: AM69A Hello,
I am developing a custom board based on the AM69A and trying to interface a WiFi/BT combo module via SDIO (for WiFi) and UART (for Bluetooth).
Currently, I am facing an issue where the SDIO card fails to initialize.
Here…