Update:
Described issue can be bypassed when using "Load Custom Containers". What is the difference between "Load Default Containers" and "Load Custom Containers" (when using prepopulated values in "Load Custom Container" scenario).
Hardware issue…
Part Number: AM62L Other Parts Discussed in Thread: BP-CC3351MOD , , BP-CC3351 Hi TI Experts,
I am attempting to interface the BP-CC3351MOD module with a custom AM62L board over the SDIO interface (sdhci2 / mmc2) using SDK 11.01.16.13.
I reviewed…
Part Number: CC3351MOD Other Parts Discussed in Thread: LP-XDS110 , , , BP-CC3351 , LP-XDS110ET Hello,
I purchased a CC3351MOD. I received it today, and I am having an issue connecting it to the LP-XDS110.
When I connect the 20 pin header from the…
Part Number: CC3351 I have ported CC3351 Netowrk Terminal example from MCU RTOS SDK R8.1 to STM32.
This example works when tested with BP-CC3351MOD board (tested wifi network scanning and connection commands).
I have built a custom module which has…
Hey Jason,
Yes, the BPF filter and diplexer should help provide rejection. We have done some high level analysis for specific bands - could you list all of the bands expected to be used?
Having that more precise detail will help us understand if our…
Hi Fenil,
Apologies as the way the conf answer was explained is a bit confusing to me. Are you saying you are using
CC3351 IC .bin on the device or CC3351MOD.bin on the device
I am asking because the default IL should not be 0. It should be…
Part Number: CC3351MOD Other Parts Discussed in Thread: BP-CC3301MOD I am making a motherboard with WiFi/BT support using TI IC with MPN# CC3351MODENIAMOZR. I am referring to the Eval Kit BP-CC3301MOD. In this eval kit, the RF Antenna BT/WiFi chip with…
Part Number: CC3351MOD Other Parts Discussed in Thread: CC3351 , , BP-CC3351 Hi,
I was on vacation and it seems the original thread was closed. I have downloaded the new wifitoolbox and the firmware for the chip and the issue I describe in the orignial…
Hi Josh,
During testing, we observed the following:
2.4 GHz Wi-Fi :
While increasing the transmit power using the calibration tool, the transmitted signal bandwidth is also increasing.
The bandwidth expansion becomes more noticeable at…
