Kengo-san,
Your customer may use 22uF. I have attached a schematic checklist to help guide them through component selections.
I hope this resolves your issue,
Ricardo
0207.BQ2588x_SchematicChecklist_AddPCBcomment.pdf
Eduardo,
The schematic file you are referencing is from the reference design. In that design the battery pack is removable, so a 100 ohm resistor is added as basic ESD protection.
As you can see on the EVM schematic below, the 100ohm on the TS…
Part Number: BQ25886 Please refer to this forum for this question. We previously posted a question and designed a board off of it.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1019089/bq25886-usb-information…
Eric,
Take a look at this schematic checklist and verify that your circuit is configured properly. As for why this is happening, I have a few questions: Is VBUS falling to 0V? During what operation does this occur (charging, standby, OTG, not charging…
Part Number: BQ25882 Other Parts Discussed in Thread: BQ25798 , BQ25792 , BQ24179 , BQ25723 ,
Hello Power management team,
I have a customer who is interested in the devices tagged below.
Vin = 5v (Vbus from USB3)
2 cell series battery (2S2P…
Sammi,
Please take a look at this schematic review checklist we have developed for bq2588X devices. If you have any further questions please reach out to me.
Thanks,
Ricardo
BQ2588x_SchematicChecklist_AddPCBcomment.pdf
Part Number: TPS65982 Other Parts Discussed in Thread: TIDA-01243 , TPS65987D , TPS65988 , Hello Guys,
I had posted article about my current project. But there was no active comment..
So I posted it again.
I assembled this pcb, and get nothing…
Hello Ricardo,
In the BQ25886 datasheet, NC pin is specified in the pin functions table and represented with 1st pin. But the 1st pin is at the same time D- pin, so which one is true?
Thank you,
bq25886.pdf
