Part Number: BQ28Z620-DEVICE-FW Other Parts Discussed in Thread: BQ28Z620 Tool/software: Dear Texas, I have designed custom PCB with BQ28Z620 fuel gauge base on Datasheet and EVM. I wanted to write golden file to its flash. I have tried to execute it…
Part Number: BQ28Z620 Other Parts Discussed in Thread: EV2400 , , BQSTUDIO
Tool/software:
Bus/topology: Single-master I²C/SMBus (only our MCU; no EV2400/others) Addressing: 7-bit. Before entering ROM mode 0x55 ; after entering ROM mode we send to…
Part Number: BQ40Z50-DEVICE-FW Other Parts Discussed in Thread: BQ40Z50 Tool/software: Which version has fixed the following problem: During the simulation of the charging end of BQ40Z50 (39 seconds after the NCT starts), a discharge current occurs, causing…
Part Number: AM620-Q1
Tool/software:
Hi, Dear Expert
Customer's AM62 device already become HS_SE.
Once device become HS_SE, I think M4 firmware should be also signed & encryption, isn't?
I try to search some E2E,
* https://e2e.ti.com/support…
Part Number: BQ78350-DEVICE-FW Tool/software: Dear TI,
Although we set the self-discharge value of our 10S2P battery to 0.88%, during our 60-hour sleep mode test the battery SOC level
Test Start point,
DUT screen capture after 60 hours,
…
Part Number: BQ27Z746-DEVICE-FW Other Parts Discussed in Thread: BQ27Z746 Tool/software: what charge chip works best with the BQ27Z746-DEVICE-FW and how do you connect the two together?
Part Number: BQ78350-DEVICE-FW Other Parts Discussed in Thread: BQ78350 , BQSTUDIO Tool/software: Hello,
I have a .srec file from Battery Management Studio for BQ78350, I parse the .srec file. I can Unseal, Unseal-Full access the device and I can make…
Part Number: BQ78350-DEVICE-FW Other Parts Discussed in Thread: BQ76940 , BQ78350 , BQSTUDIO Tool/software: Hello,
I am commissioning a new BMS based on the reference design for the BQ78350 with the BQ76940 and BQ76200PWR, the only notable exception…
Hi,
Tarek Sharbo said: → Is this expected behavior after turning off IT tracking?
yes
Tarek Sharbo said: Once the learning cycle is marked complete ( Update Status = 0x06 ), should the gauge handle FET control automatically?
no, the fets are controlled…
Part Number: BQ40Z50-DEVICE-FW Tool/software: Hi Ti Team，
When we use BQ40Z50-R3 FW VERSION 3.09 and continuously charge the battery to the end of charging with SOC = 99%, after the NCT flag in the charging state is set to 1, if there is a discharge…
