Hi, here is the complete log:
reproduction steps is nothing special, it just happening, no special pattern, timing.
it is irregular.
root@am335x-evm:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.12.10 (xxx@xxxx…
Other Parts Discussed in Thread: WL1831 , DA8XX , TPS65217 , WL1271 Dear TI Expert!
I having problem when using Murata WL1831 with Prebuilt Image.
With wifi, I cannot scan the AP, with Bluetooth I cannot power on module by Bluetopia stack, please…
Hello Suren,
Let allow us to clarify and update current status as below:
1) TAS2505 Codec driver Probe, it waits to receive i2s audio signal from SoC.
Thread: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1401766/am625…
Hello Hari,
Yes we are using Ti Linux SDK 6.03. The following is the console log :
U-Boot SPL 2019.01-g333c3e72d3 (Apr 20 2020 - 05:48:48 +0000) DRA752-GP ES2.0 no pinctrl state for default mode Trying to boot from MMC1 no pinctrl state for default…
Hi,
Thanks for the update and I understand your frustrations. Regarding documentation on adding a custom board, we've made some major updates which will be released soon. A new section is added to cover creating custom board for AM335x/437x. Please…
Hi,
Thank you for your response Moritz.
The schematic is divided in two parts. Hope this is not an issue.
Schematic:
As you mentioned, inductance is quite high. I hadn't used calculator file to check my design but i did it now.
Calc file…
Hi,
Please see the dts and bootlog attached. I have only modified the am57xx-evm-reva3.dts file for my spi and i2c configurations. All other dts files are the original files included in the sdk. I am using version 4.00.00.04.
am57xx-evm-reva3.dts…
Hi Yan,
The link got accidentally deleted, please find a snapshot of the link that you are trying to access, we will have it restored shortly.
Regards
Karthik
/cfs-file/__key/communityserver-discussions-components-files/791/Processor-SDK-Linux…
Part Number: EVMK2H Other Parts Discussed in Thread: TCI6638K2K Hi,
We have recently purchased a number of new EVMK2H REV40 boards and set them up by running the Processor SDK Linux for K2H/K2K v03.01.00.06 setup script.
We are booting up the board…
