Hi,
This Sitara EVMSK board is configured as TFTP boot, NFS at the host Ubuntu 14.04 PC. Yesterday, I built a simple module and it can be inserted at the console.
Today, a few changes are made to the kernel configure (in fact, I wanted to restore…
Other Parts Discussed in Thread: TPS659037 , DRA752 Team,
We are facing the below issue: The TMDSEVM572x was booting accordingly with the Linux SDK 3.x on the SD card. Now it can not boot anymore. The SW has not been changed. The log is copied to the…
Hi,
I am using NHD-5.0-800480TF-ATXI#-CTP on am335x platform. My LCD display is proper and TP have created the ft5x0x i2c node and binded the driver and it is probed properly.
Interface has created as event2 for CTP. when i try to capture the CTP…
Other Parts Discussed in Thread: AM3359 , TFP410 , TPS65910 , WL1271 Hi,
Since using .dtb file, I find that TFTP boot and remote NFS always have problem on Sitara AM3359 SK board.
I do not success to generate uboot.env yet. uEnv.txt is still used…
Hi Dennis,
Actually, the register map of LP581x family is too much. So we split it into two parts. Please find the detail register maps below first and it will release on ti.com later.
SNVU859 LP5813 Register Map_20230411.pdf
BR, Jared
Dear All,
I am working on custom DM8168 processor and not able to stream more than one video through rtp.
I am following commands to stream and receive the video in the custom board.
For receiving:
gst-launch -v udpsrc port=4000 caps="application…
Hi Yordan,
I can bring the board to user space with nfs mount.
I can see /sys/devices/system/cpu/cpu1.
But when I do the command:
echo 1 > /sys/devices/system/cpu/cpuX/online
I get this:
[ 81.960882] CPU1: failed to boot: -22
I don't touch…
Hello Hiroyasu,
I attached some design tools you use to further estimate the VIN ripple with respect to the CIN and VIN. Use equation 7 and 8 from the datasheet to figure our the required ESR. ESR is another parameter that you need to lower as possible…
Part Number: CC3200 Other Parts Discussed in Thread: UNIFLASH
Hi ,
I am making my custom hardware using CC3200R. I am able to detect the Controller using JTAG. I am facing following issue with SPI flash.
1)SPI flash sometimes gets detect.
…
