Part Number: CC1120 Other Parts Discussed in Thread: CC1125 , Hello
We are using CC1125 for 12,5kHz narrow band application at 869,212MHz (Social Care under EN300-220), and using a 38,4MHz TCXO clock.
Supply voltage= 3,3V
Have found that CC1120…
Part Number: CC1120
Tool/software:
I'm attempting to read 3 extended registers(0x2F71, 0x2F72, 0x2F73) in a single "transaction". All values received are as expected, other than 4 bits inside the RSSI0(0x2F72) register which are the 4 LSB of the full…
Part Number: BOOSTXL-CC1120-90 Other Parts Discussed in Thread: CC1190 , CC1120 Tool/software: I am working on a CC1120 + CC1190 custom board with a carrier frequency of 868 MHz , using the following configuration:
Bit rate: 1.2 kbps
RX filter bandwidth…
Part Number: CC1120 Other Parts Discussed in Thread: CC1312PSIP , CC1352P , CC1352P7 , CC1354P10 , MIOTY , CC1312R , CC1352R Tool/software: Hi,
We are developing a sensor data collection system and would like guidance on selecting a reliable wireless…
Part Number: MSP430FR5989 Other Parts Discussed in Thread: CC1120
Tool/software:
We need to design a new system that contains 434Mhz narrowband (CC1120) and mesh network (CC110x+FEM) based on 868MHz, 27dB PA They work on their own antennas (wired…
Part Number: BOOSTXL-CC1120-90 Tool/software: I am following this guide CC112x TI-SIGFOX SDK Demo to connect BOOSTXL-CC1120-90 and MSP-EXP430 boards to sigfox. Yesterday I emailed the tech-p1-team@sigfox.com to request the activation code binary application…
Part Number: CC1120 Other Parts Discussed in Thread: CC1190 , The customer try to measure the conduct RF power of the EVB of CC1120-CC1190 and find that the conducted power is about 22 dBm, which is much lower 27 dBm which is stated in the datasheet,…
Part Number: CC1120 Hi TI team:
I am using CC1120 as a transceiver, and the configuration used is also recommended by smartRF studio. The frequency I use is 433MHz. 4FSK, FIFO mode, symbol rate is 9600bps, deviation is set to 4.8KHz. RX filter BW is…
Part Number: CC1120 Other Parts Discussed in Thread: CC-DEBUGGER HI~
I have a question when connecting CC1120 to cc debug.
The DC/DD waveform was measured during the RF test by performing SMARTRF STUDIO by connecting CC1120 to cc debug.
1) Both…
Part Number: CC1120 Tool/software: HI, my CC1120 receives messages from many devices, some with preamble 0xAA and others with 0x55 and it seems strange to me because I configured it to handle only 0x55.
My configuration is this:
CC112X_PREAMBLE_CFG1…
