Part Number: CC3200-LAUNCHXL Other Parts Discussed in Thread: CC3200 Hi Experts,
Please help with the inquiry below.
Can you provide any guide on how to connect a CC3200 Laundpad to a live CC3200 device via JTAG or UART:
To view console messages…
Part Number: CC3200-LAUNCHXL Other Parts Discussed in Thread: UNIFLASH , CC3200 Tool/software: I seem to be going on in an endless circle of downloading different uniflash_9.1.0 version, and not being able to connect to the CC3200.
SOP0: ON (jumper…
Part Number: CC3200-LAUNCHXL Other Parts Discussed in Thread: UNIFLASH Can a device that has been programmed with a firmware image with valid signed certificates be re-programmed with the dummy certificate from the certificate playground for development…
Part Number: CC3200-LAUNCHXL Other Parts Discussed in Thread: CC3200 Tool/software: Can two CC3200 modules be connected via WiFi P2P? (One as GO, one as CL). Is there TI official example code? Thanks!
Part Number: CC3200-LAUNCHXL Other Parts Discussed in Thread: CC3200SDK , , CC3200 I have a CC3200-LAUNCHXL board, and I'm using CCS Version: 12.6.0.00008 to run a blinky example from the CC3200SDK_1.5.0. However during debugging in Registers view, I…
Part Number: CC3200-LAUNCHXL Tool/software: Hi All,
One of our customers connected to Wi-Fi using EAP and certificate bypass mode, and it has been working fine for 2 years.
If they renews the new certificate in the ISE server, then the device disconnects…
Part Number: CC3200-LAUNCHXL Other Parts Discussed in Thread: CC3200 , , UNIFLASH Tool/software: I ordered and just received both a CC3220-LaunchXL and a CC3200-LaunchXL. I am able to get the CC3220 to do the out-of-box demo, but I can't get the CC3200…
Part Number: CC3200-LAUNCHXL Other Parts Discussed in Thread: UNIFLASH , CC3200 Hi,
working with CCS 6.1.0 SDK1.1.0, in debug mode it works perfectly.
After I close CCS, plug off and then plugin USB, it does not work.
Disconnected jumper SO2 but…
Part Number: CC3200-LAUNCHXL Other Parts Discussed in Thread: CC3200 , UNIFLASH Hi,
I am using CC3200 Launchpad, SDK1.1.0 and CCS6.1.0
No problem to develop software and debug.
Now I would like to make it work in release way.
First, I expected…
Part Number: CC3200-LAUNCHXL Other Parts Discussed in Thread: CC3200 , UNIFLASH What would be the best way to reset the target processor on a CC3200 Launchpad without reprogramming the flash ?
I've installed the latest Uniflash (8.5.0) and it seems…
