Search tips
Showing 6 results View by: Thread Post Sort by

  • CD4041UB: complimentary buffer options with lower Vih_min requirements

    TI Thinks Resolved
    Part Number: CD4041UB Other Parts Discussed in Thread: SN74AHCT125 , SN74AHCT04 Hi, I am also looking at complimentary buffer options to re-drive like the CD4041UB. Are there newer complimentary buffer options? It looks like the CD4041 needs a Vih_min…

  • RE: CD4041UB: TSSOP14

    Hi Ilan, Yes, channels inside the same CD4041UB can be paralleled to increase current output. Do not exceed 100mW per channel, or the device could be damaged (see the absolute maximum ratings table).

  • CD4041UB: Driving optocoupler

    TI Thinks Resolved
    Part Number: CD4041UB Hi Ti, PLS advise if can i drive with IC PN CD4041UBPW (VDD=10v) the optocoupler PN PS8101 at temperature range from -40C to 85C ? 1.when i have 277 ohm near to output driver in series connect to another series resistance of…

  • CD4041UB: increasing output buffer current

    TI Thinks Resolved
    Part Number: CD4041UB Hi, in order to gקא more current can i shorts the inputs to the input signal ,then short the outputs to the output signal? BR, Ilan
    • Answered

  • CD4041UB: Converting 5V to 8V clock to drive 2.8nF capacitive loads under 1MHz

    Resolved
    Part Number: CD4041UB Hello, Any suggestions? Thanks! Kevin
    • Resolved
    • Answered

  • Strong buffer advice recommendation ??

    Resolved
    Hi TI expert, Now I need a buffer to drive a power FET(Low side) which input cap is 2nF cap at high frequency (10MHz) but it needs 400mA CMOS buffer at 12V. I look at your buffer area.... I only find CD4041UB - CMOS Quad True/Complement Buffer which…
    • Resolved

Didn't find what you are looking for? Post a new question.