• CD4044B: CD4044B Q100 needed

  

  HS FAE Germany

  TI Thinks Resolved

  Part Number: CD4044B Other Parts Discussed in Thread: SN74LS279A Tool/software: Hi, customer ask for an alternative of MC14044B(NLV14044BDR2G) but needs automotive qualification. I found CD4044B and SN74LS279A but not sure if we can offer these in Q100…

  • 11 months ago
  • Logic
  • Logic forum
Answered

• CD4044B: TSCA compliance

  

  Andy Crisp

  Resolved

  Other Parts Discussed in Thread: CD4044B Hi, Please can you send me a TSCA declaration of compliance for CD4044B[D|DR|DE4|DRE4]

  • Resolved

  • over 1 year ago
  • Logic
  • Logic forum
Answered

• CD4044B: High voltage signals to interface with microcontroller

  

  Sahil

  Resolved

  Part Number: CD4044B Other Parts Discussed in Thread: CD40109B Hi We are using CD4044B chips connected to 15Vcc. Therefore, the latched outputs signals(Q1,Q2,Q3 and Q4 of the chips) of the chips will be at 15V. What would be the best solution to translate…

  • Resolved

  • over 2 years ago
  • Logic
  • Logic forum
Answered

• CD4044B-MIL: Logic Dominated by R=0

  

  Noah Ludwig

  Resolved

  Part Number: CD4044B-MIL I am looking for guidance on when this SR latch is in the 'forbidden' state with S and R both set to 0 what the logic output is; the data sheet has a note saying this output is dominated by R = 0, but no state table to show the…

  • Resolved

  • over 1 year ago
  • Logic
  • Logic forum

• CD4044B: Can CD4044B work at 3.3V power supply?

  

  user4356333

  Answer Suggested

  Part Number: CD4044B Other Parts Discussed in Thread: SN74AHC00 , SN74AHC02 Though the recommended operating conditions specified in the datasheet indicates it can work between 3V and 18Volt. But all the parameters in the datasheet seems to be tested…

  • over 5 years ago
  • Logic
  • Logic forum
Answered

• CD4044B: unused channel

  

  K.Yaita

  Resolved

  Part Number: CD4044B Hi Team, My customer considers to use CD4044B. If he doesn't use Q4, is the following correct? Q4=open, S4=R4=GND(0V) Best Regards, Yaita / Japan disty

  • Resolved

  • over 7 years ago
  • Logic
  • Logic forum

• CD4044B: Vih for 3.3V supply operation

  

  visakh gopinathan

  TI Thinks Resolved

  Part Number: CD4044B In the datasheet of CD4044B the input high voltage is specified for supply voltage of 5V, 10 V and 15V. But we are operating at a supply voltage of 3.3V and I would like to know the Vih for 3.3V supply. Kindly suggest the solution…

  • over 7 years ago
  • Logic
  • Logic forum

• CD4044B: Datasheet Truth Tables

  

  Daniel Vasher

  Answer Suggested

  Part Number: CD4044B Hello guy, Datasheet http://www.ti.com/lit/ds/symlink/cd4044b.pdf page 1 Truth Tables shows S=0, R=0, E=1 Q= the double triangle. Is this correct?

  • over 8 years ago
  • Logic
  • Logic forum

• TLV9021-Q1: Latching amplitude of input signal

  

  Dierk Bronner

  TI Thinks Resolved

  Part Number: TLV9021-Q1 Other Parts Discussed in Thread: CD4044B , CD4043B , SN74LVC2G02 , SN74LVC2G00 Tool/software: Hello, my customer is looking for a smart way to latch the amplitude of an input signal and compare the amplitude against a reference…

  • 4 months ago
  • Amplifiers
  • Amplifiers forum
Answered

• RE: CD4093B-MIL: CD4093B configured as an RS Fip-Flop

  

  Clemens Ladisch

  Resolved

  You said the entire circuit does not work. Does the RS latch work, i.e., is its output correct? (The CD4044B just adds output enable.)

  • over 1 year ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.