Part Number: CD4050B Other Parts Discussed in Thread: UCC27524A Hello
I wish to have a Hi to Lo translation for multiple inputs.
From 15 V to 3.3 V for my DSP.
Can I use this CD4050B wuth Vdd of 3.3 V ?
Any precautions or any limitations?
Thanks…
Part Number: CD4050B Hi Team,
Customer meets EOS issues in the real application, the output pin is opened based on FA analysis.
So they would like to add ESD diode in the both input pin and output pin. Do you have any experience that can share to…
Part Number: CD4050B Tool/software: Hi,
I am using the CD4050B buffer for clock and data lines both use 5V logic.
I would like to use the CD4050B to convert the logic level of these signals to either 5V or 3.3V, depending on the requirement. My idea…
Part Number: CD4050B Other Parts Discussed in Thread: TMS320F28335 Tool/software: Dear All,
We need to use CD4050B for +15V signal to +3.3V level which will directly connected to TMS320F28335 pins. Please update about the propagation delay when Vin…
Part Number: CD4050B Other Parts Discussed in Thread: CD4504B , CD40109B , TLV1811 Hi,
Our customer want to know if the input is 2.5V, VCC is 15V ,can the output reach 15V? I couldn't find this information in datasheet.
VCC=15V, Vin=2.5V, Vout=15V…
Part Number: CD4050B Other Parts Discussed in Thread: CSD17571Q2 Tool/software: Hello
I wish to translate +15 V signals to 3.3V to my DSP.
Can I use CD4050B for this purpose, where the Vdd is 3.3V
( A similar IC from Onsemi MC14050 specifies a Vdd…
Part Number: CD4050B Hello
I was studying the Data Sheet for the Max dt/dv on the Inputs while thinking of using this
for RCD Timing control for up to 4.5 uS, using 15 V Logic, for large IGBT Drives
Can someone please explain Fig 9.2.3 of the…
Part Number: CD4050B Other Parts Discussed in Thread: TLV1811 , TLV7211 , UCC27527
Hi Clemens
Thanks for your prompt support in the past.
I've a few supplementary Q's, answers to which I could not gather from the Data Sheets.
Pl be good enough…
Part Number: CD4050B Tool/software: CD4050B
The CD4050B datasheet does not specify a maximum voltage for IOpin, but is there a risk of failure if VIN=12V is applied when VCC=0V?
From looking at the internal circuit, it appears that only reverse voltage…
