Part Number: CD4056B Tool/software: hi TEAM,
my customer have some VCO feature from CD4056B, since it is a very old device, would you help to check whether it have 2KV HBM data?
and do we have the IO structure to show if we not use the IO, then how…
Part Number: CD4056B There are 3pins need to clear:
Pin 1 (Strobe) when high will push the inputs directly to the outputs, but when it goes low it will hold the previously applied output in the display.
Is it mean 4 bit input pin directly to a~g output…
Part Number: CD4056B Hi,
In our internal part number apply SOP, information below are needed
(EE) * Component Version:
(EE) * MSDC Level:
(EE) * Part Grade (Car, Military, NEBS Level1, NEBS Level2, NEBS Level3, Normal ) …
Part Number: CD4056B Other Parts Discussed in Thread: CD74HCT4511 Hi Expert,
Customer has question for VDD and A to D pin, If we use P3V3 for VDD and 1.8V voltage level into A~D pin, do we need level shift for 1.8V transfer to 3.3V?
Regards,
Ma…
Part Number: CD4056B Other Parts Discussed in Thread: LP8866-Q1
I need to drive a very small 4-character 7 segment display. www.digikey.com/.../7364561 I’m looking for a small i2c or SPI driver IC that can offload the support of this display from the…
Part Number: CD74HCT4511 Other Parts Discussed in Thread: CD74HC390 , CD74HC4067 , CD4056B , CD74HC4543 On the first page of the datasheet, the display figure below the pinout implies that segment 'a' is enabled when BCD = 6, and similarly segment 'd…
