Part Number: CD4071B Other Parts Discussed in Thread: CD4093B-Q1 [Question]
Is it possible to adopt CD4071BPW in an automotive applications?
CD4071B, CD4072B, CD4075B TYPES datasheet (Rev. D) (ti.com)
I found below document (2017 English ver and 2014…
Part Number: CD4071B Hello,
I want to use the CD4071B with output current limit resistor.
I want to make sure that I limit the current to the level it wont damage the device.
I understand that when using 5V supply the maximum sink/source current and…
Part Number: CD4071B Hello
The input / output block diagram on the datasheet of the CD4071BNSR is shown as Diode (attached below). Can you tell if this diode is a general diode or a zener diode or a parasitic diode? Also, can you tell me about the rating…
Part Number: CD4071B Other Parts Discussed in Thread: CD40106B I have made the mistake of doing what Ethan proposed in his e2e post: <https://e2e.ti.com/support/logic/f/151/t/536693>
Which is to filter an input signal line of an CMOS OR gate…
Other Parts Discussed in Thread: CD4071B Hi All,
We have a question regarding the CD4071B. We needed to add a 0.01uF capacitor before one of the inputs, slowing the positive transition down to 100 us, but we're worried about damaging the part to due meta…
Jejomar, For logic devices the max current will be independent of the pulse time. That's to say, you shouldn't exceed the max current ratings for any amount of time. For these older CD4K family of devices the output current limitation isn't listed…
Select this link to see answers to common questions, detailed use case implementations, and part recommendations for logic and voltage translation devices. .
Top Logic and Voltage…