Part Number: CD4093B-MIL Other Parts Discussed in Thread: CD4093B , TLV803E I have configured an RS Filp-flop with two of the NAND gates in the CD4093B package. When the power is applied, both inputs are biased up to Vcc (11.4V) through 100k resistors…
Part Number: CD4093B-MIL Other Parts Discussed in Thread: CD4093B , CD4044B , TL7733B , TPS3710 , TL7700-SEP Attached, is our circuit; a well-known RS Flip-flop configured from two of the NAND gates within a CD4093B. for some unknown reason (and luckily…
Part Number: CD4093B-MIL Other Parts Discussed in Thread: UC1705 CD4093 output is fed to a npn-pnp based totem pole circuit to drive a Mosfet. A resistor of 1kohm is provided in between the cd4093output & base of the totem pole circuit. Now observed that…
Part Number: CD4093B-MIL Dear team,
could you please highlight the differences between these two PNs? I'm not able to find them just looking at the datasheets.
Thanks.
Federico
Hi Elise,
Please see the links below:
https://www.ti.com/product/TL431 (this is not a logic part. please double check with the appropriate team.
https://www.ti.com/product/CD4013B-MIL
https://www.ti.com/product/CD4023B-MIL
https://www.ti.com…
Hi Elise,
The parts above are obsolete and can be replaced with the corresponding MIL part, ie. CD4002BMx -> CD4002B-MIL.
CD4002B-MIL CD4027B-MIL CD4073B-MIL CD4081B-MIL CD4082B-MIL CD4013B-MIL CD4023B-MIL CD4060B-MIL CD4066B-MIL CD4093B-MIL
Manufacturing…
All these devices were discontinued.
For the TL431M, the replacement is the TL 1 431M: ti.com/product/TL1431M
For the National Semiconductor devices, the replacement is the corresponding device acquired from RCA, e.g., CD4013BMx → CD4013B-MIL. ti…
Hi Charlie,
I think the most common work around I see with our devices is just making a set reset latch using a two channel nand gate. Here's a recent example:
(+) CD4093B-MIL: CD4093B configured as an RS Fip-Flop - Logic forum - Logic - TI E2E support…
