Part Number: TDA4AH-Q1 Other Parts Discussed in Thread: TDA4VH Tool/software: New hardware design for
TDA4AH88TGAALYRQ1
TDA4VH, TDA4AH, TDA4VP, TDA4AP series
I am starting a new design for this Ti SOC.
I have a few questions.
For the DDR4…
Other Parts Discussed in Thread: OMAP3530 , SYSCONFIG , ADS7846 Hi All,
I wonder if anyone could help me with issue. I am currently working on custom board and developing Telit Modem Driver. The MODEM driver is only toggling GPIO line to turn Modem…
Part Number: SM72442 Other Parts Discussed in Thread: SM72445 Hello. My client company applied SM72442 and is developing a Solar Optimizer. Currently, development is in progress based on the EVM Board of SM72442 and SM72445. Do you have a calculation…
Hi Amelie,
It could be that the webench is using electrolytic capacitor instead of ceramic capacitor. The electrolytic capacitor add some zero on the compensation due to its ESR of 35mohm.
The important part is that the time constant of Rcomp and…
AWR1xx_Radar_Interface_Control.pdf Hello,
In the radar Studio documentation, there is an ICD document, I will attach it this time. Under the Initial Self test, and the Repetitive testing there is a bit mask for each test. Once you know which bit field…
Part Number: SK-AM62 Hello Ti,
I have built arago project for am62 on ubuntu 18.04 .
with:
https://software-dl.ti.com/processor-sdk-linux/esd/AM62X/08_06_00_42/exports/docs/linux/Overview_Building_the_SDK.html
and the errors are as follow:
ubuntu…
Hi Joseph,
How are you planning to route the SMBus signal from your host to the BQ40Z80 EVM? If you're using test points TP10 and TP11, the shunts for J18 and J22 can be removed or J18 shunt position pin 2 to pin 3 and J22 shunt position pin 1 to pin…
Trevor,
The BQ2754-G1 is a battery side gauge; this means that when a learning cycle is completed the update status should read 0x06.
You would need to program the default srec. file into the gauge to have it completely reset.
https://e2e.ti.com…
Katie,
Are you looking at the latest data sheet? The one attached does not list 85C but a range from -40 to 125 and the two current numbers are 0.76mA and 0.75mA. See attached.
Regards,
Jim
ads6142-ht.pdf
