Search tips
Showing 388 results View by: Thread Post Sort by

  • DLPDLCR2000EVM: connection to Jetson nano

    TI Thinks Resolved
    Part Number: DLPDLCR2000EVM We are having issues making the connection to jetson nano board. Does anyone succeed doing so ? Any hint/tutorial would be most welcome ! We started from this tutorial for a raspberry without any succes. Thanks in advance…

  • DLPDLCR2000EVM: changing the lens of the projector

    Part Number: DLPDLCR2000EVM Hi, I would like to make a wider projection in a shorter distance, that's why I was thinking if it would be fesable to change the lens, and use a fisheye lens. My goal is to project from around 1 meter and cover 1 square…
    • Answered

  • DLPDLCR2000EVM: DLP2000, DLPC2607, DLPA1000

    Resolved
    Part Number: DLPDLCR2000EVM Other Parts Discussed in Thread: TIDA-00325 Hello everyone. I'm interested in the DLPDLCR2000EVM board to make it a second monitor for a laptop. At first, I thought I'd use a screenshare software to share my screen on a…
    • Resolved
    • Answered

  • RE: DLPDLCR2000EVM: Raspberry PI Interfacing

    Resolved
    Hello CSC, The tutorial linked in the comment above and related E2E posts are the only resources we have in regards to the Raspberry Pi setup with the EVM. The Raspberry Pi is not officially supported by TI so the support we can give you is quite limited…

  • DLPDLCR2000EVM: Image distorted

    TI Thinks Resolved
    Part Number: DLPDLCR2000EVM Hi Team, A customer is having an issue with the output projected by DLPDLCR2000EVM interfaced with a Rasberry pi. The projected image was jittering and distorted. I have instructed the customer to use equal-length jumper wire…
    • Answered

  • DLPDLCR2000EVM: Hardware issue

    Resolved
    Part Number: DLPDLCR2000EVM Hi Experts, Good day. Seeking your assistance on this query: Status LEDs D2 and D3 indicate the status of HOST_IRQ and PROJ_ON respectively. HOST_IRQ will go low when the system has completed boot sequence, while PROJ_ON indicates…
    • Resolved

  • DLPDLCR2000EVM: Slit Width and Micromirror Individual Tilt

    TI Thinks Resolved
    Part Number: DLPDLCR2000EVM Other Parts Discussed in Thread: DLPC2607 , DLP2000 , Hello E2E Experts, Good day. I was wondering if I can look at single-slit diffraction with the EVM. In other words, I am trying to change the slit width with the corresponding…

  • RE: DLPDLCR2000EVM: Raspberry Pi 3B+ Splash Screen Flickers but no Desktop Display

    Hello Ahmet, Currently, there is no official TI support for the Raspberry Pi with the DLPDLCR2000EVM. Support will be provided where possible but here are some resources to start that may help: E2E Thread 1 , E2E Thread 2 , and an external tutorial (RPi implementation…

  • RE: DLPDLCR2000EVM: Do I need to do some special configurations when input a non-native resolution via Parallel 24-bit RGB888 video I/F

    Hello, Can you confirm that your setup works as intended with a 640x360 nHD resolution? If it does not work, then it is likely that either the wiring is incorrect, the I2C commands are not all being sent or sent correctly, or the controller is not configured…
    • Answered

  • DLPDLCR2000EVM: Linux Flipping screen doesn´t work

    Resolved
    Part Number: DLPDLCR2000EVM Dear community, I tried to flip the screen of the DLP by sending i2cset -y 3 0x1b 0x12 0x0f 0x0 0x0 0x0 0x0 i or i2cset -y 3 0x1b 0x12 0x0f 0x0 0x0 0x0 0x01 i But both has no effect. I tried also to set the brightness of the LED…
    • Resolved

Didn't find what you are looking for? Post a new question.