Hi Pavel
I have used IPNC RDK ,DVR RDK and EZSDK on platforms DM8168 and DM388.
I think this is a common question.
I have posted in multimedia software codecs forum too.
Thanks
JK
Hi,
I'm sorry that we no longer provide direct support on the e2e forum for this product. Please refer to the below FAQ post regarding FAW about this product and the third parity supports mentioned in the post.
https://e2e.ti.com/support/processors…
Hi Anshuman,
I'm working with DM388 and IMX136 image sensor with 12-Bit Parallel CMOS digital data output.
I'm having same issue that all the area in the image where light source is there or reflection of light is there, the area becomes dark pink…
Other Parts Discussed in Thread: PCF8575 Hi,
We are trying to establish a command channel between our image sensor and the DM388 using I2C via wires connecting to I2C2_SDA and I2C2_SCL pins (with the sensor assigned a slave address of 0x04 and clock…
Hi,
Sorry, we do not provide direct technical support on forum for this product. As recommended on the product folder and in FAQ , please feel free to reach out the 3rd parties listed in them for additional support. Y ou may search the E2E forum for…
Hi,
I am sorry, I thought I have answered you in this post https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1063703/dm365-8-bit-720p-digital-output-with-embedded-sync that we no longer offer direct support for this device on…
Hi All,
S/W : IPNC RDK V3.8
Platform : DM388
My requirement is to capture 1080p and to get 4 different resolutions (1920x1088,960x544,480x272,240x136) simultaneously without any time drift between them .
I am using the VIP resizers and two scaler…
Part Number: CARDVRRDK
Tool/software: Linux
Hi.
I'm designing "IP-Cenara systen" now, and I hope to try the DM388. So I won't to refer the circuit diaglam of this solution.
TMDXEVM388 or CARDVRRDK or TMDSIPCAM388X36
But I haven't looked for…
Hi,
We are developing a board based on Appro DM388 IPNC, but with an MII PHY component: KSZ8001L because the original could not be ordered. U-Boot works well in downloading files from the ethernet. The kernel, 2.6.37, however, starts up well and connects…
Our board based on DM388 IP Camera Reference Design. Kernel link arago-project.org/.../
May be you have some real example to tune IrDA uart by dm385? Because I manipulate uart registers directly from userspace by <open("/dev/mem"); mmap> functions.…
