Part Number: DP83640 Hi,
I am working with the ATSAME70N21 combined with DP83640. My firmware is built with FreeRtos 10.0.0 and LWIP 2.1.2.
My goal is to implement a PTP slave with Ordinary Clock.
1) Is there a RTOS driver for DP83640? I only found a linux…
Hi Hillman Lin,
We use the freertos, lwip and the DP83867.
We can develop network port without freertos, or under freertos. So I think it's a universal driver, not a Linux driver which like the DP83640 driver as the website and picture below:
https…
Hi Ram,
You mentioned that you were able to read the content of the received message and it is correct, were you able to check if any other events got triggered in the PTP_STS registers?
For register configuration, I would recommend referring to a more…
Hello furkan amancalı
Please refer to the documents and the code from the below link that should help .
https://www.ti.com/tool/DP83640SW-LIB
Regards,
Sreenivasa
Hi Prabhakar,
Here is a software design guide for the DP83640: https://www.ti.com/tool/DP83640SW-LIB
Thanks,
Lucas
All information in this correspondence and in any related correspondence is provided “as is” and “with all faults”, and it is subject to…
Hi Jun,
Follow this link for Software Design Guide and C Software Reference Library: www.ti.com/.../dp83640sw-lib
The software design guide has description on IEEE 1588 configuration and examples.
Regards,
Hung Nguyen
Part Number: TMDX570LC43HDK Other Parts Discussed in Thread: DP83640 , HALCOGEN Good morning,
we need to implement a network communication between several TMDX570LC43HDK boards with syncronization based on 1588 PTP protocol,
the board is equipped with…
This will require a software effort. There is a software development guide describing the functionality available at:
http://www.ti.com/tool/dp83640sw-lib
The demo shown on the Product Folder page video relies on an FPGA board and software. Alignment…
Hi Naeem,
Please read through the Software Development Guide. You will find information about PTP implementation.
http://www.ti.com/tool/dp83640sw-lib
Regards,
Ross
Hi Daisuke,
Apologies for the delay. There is a Software Development Guide (SDG) for DP83640.
http://www.ti.com/tool/dp83640sw-lib
In the SDG you will find information about 1-step operation and receive timestamp insertion.
Regards,
Ross