Hi Evan,
Thank you for your respense.
I steel have problem, d'ont work for me but I've noticed that to configure the DP83848I-MAU-EK for SNI mode, we need to set the following pins:
RX_DV = High
TXD_3 = High
And also :
AN_EN = Low
AN0 …
Part Number: DP83848H-MAU-EK Other Parts Discussed in Thread: DP83848M , Hello,
I have some problem with DP83848m/t/H PHY,
i am usign the devt board : DP83848H-MAU-EK and the communication seems not working
I sent eth packet with FPGA the MII interface seems…
Part Number: DP83848H-MAU-EK DP83848 MAU Evaluation board with my MCU not detecting DHCP IP address. I am interfacing DP83848 MAU evaluation board with MII but I am not able to detect DHCP IP and I am using STM32F4 Discovery Board and in my IDE i am not…
Part Number: DP83848I-MAU-EK Other Parts Discussed in Thread: DP83848YB , DP83848I , DP83848C ,
I was going through the part DP83848 (10/100-Mbps Ethernet PHY transceiver) and in the ordering info within datasheet, I found that P/N DP83848YB only differs…
Part Number: DP83848I-MAU-EK Hello Team,
My customer has a DP83848I-MAU-EK/NOPB being ordered and we see on the schematic there is an ON-MII-MALE interface. Does this product come with the female side to interface? Do you know where they can find a connector…
Part Number: DP83848I Other Parts Discussed in Thread: CC2640 Dear TI team,
Thank you for your support.
This is Takashi from Digi-Key.
Can you let us know Giteki (telec) number for DP83848I-MAU-EK/NOPB?
Giteki is Japan RF law.
www.tele.soumu.go.jp…
Part Number: DP83848I-MAU-EK Other Parts Discussed in Thread: DP83848I Hello folks,
I have an DP83848I-MAU-EK/NOPB board from TI. What I need to do is have data going through the phy while I expose the chip to conditions. What I did was put on the 50mhz…
Part Number: DP83848K-MAU-EK The DP83848K-MAU-EK board silkscreen does not indicate the location for J10.
Can the User Guide (snlu90) and Top Silkscreen (SV012986) be updated to help customers locate this pin more easily? The only way to find it is to…
Hi Gerwin,
Thanks for submitting your query, I would be glad to help. Yes you can! For reference, please refer to the DP83848K-MAU-EK . The Altium layout file is available in the Design Files tab.
Note that this is the 848 K variant of the part, the PFBOUT…
Hi Aniruddha, On a previous message I have attached a diagram of where the customer was measuring the eye diagram like you asked and I added some additional information that they shared. I am asking you if you have any information you can share on how…
