Part Number: DP83867ERGZ-R-EVM Connected to XILINX ARTIX7 FPGA
Ran external connections @ 1GbE to Wireshark on laptop. Tx good, Rx nogo
Tried loopback, crossing A - B @ 100MbE, directly connected at RJ45. Tx good, Rx nogo
In both situations, Ethernet…
Part Number: DP83867ERGZ-R-EVM Hello team,
On the user guide, it says GPIO_0 is connected to RJ45 Left (Green).
But on the schematics, GPIO_0 is not connected to LED, and GPIO is not meant for driving LED.
Is GPIO_0 statement should be LED_0? Could…
Part Number: DP83867ERGZ-R-EVM Other Parts Discussed in Thread: MSP430F5529 Dear Team,
1. We would like to use the TDR function of DP83867. Can we use EVB to test TDR function?
Many Thanks.
Jimmy
Part Number: DP83867ERGZ-R-EVM Hello,
I need a letter of volatility for the above part number, if available.
I believe this part does not contain any kind of memory, and as such, would not have a LOV - any confirmation would be appreciated.
Thank you…
Part Number: DP83867ERGZ-R-EVM Hi,
I have a quick question about the DP83867ERGZ-R-EVM board. Here is out test setup. The interface between the Soc Dev Board and DP83867ERGZ-R-EVM is RGMII.
SoC Dev Board ---------- DP83867ERGZ-R-EVM ---------- Router…
Part Number: DP83867ERGZ-R-EVM
Our design includes a gigabit PoE ethernet interface based around the DP83867 PHY, and we're currently unable to establish a network link of any kind. We have confirmed that we are able to communicate with the PHY and…
Part Number: DP83867ERGZ-R-EVM Hi,
In DP83867ERGZ-R-EVM design files, DP83867RGZR is adopted but I can't find it in Ti.com.
Could you let me know the part number?
Thanks.
Part Number: DP83867ERGZ-S-EVM Other Parts Discussed in Thread: DP83867IS I am looking to purchase this part but I need to know if it will fit in my enclosure. I cannot fin any information online on the mounting hole pattern. It would be best to have a…
Part Number: DP83867ERGZ-R-EVM Other Parts Discussed in Thread: DP83867E , MSP430F5529 I am configuring the DP83867E PHY and am testing out read/write indirect register access to an extended register. I followed the 8.4.2.7.1 steps in the DP83867E datasheet…