Part Number: DP83TC814R-Q1
Hi,
Good Day. This component needs a default config and I want to know if all of the required config (Table 8-17) can be done via the MDIO (SMI) interface. Could you let me know how this is done?
Please advise. Thank you…
Part Number: DP83TC814R-Q1 Hello Expert,
I'd like to know about the Boot strap latch-in timing when they after release RESET_N after VDD supplied. Their RESET_N release timing is as follows.
For the case of RESET_N and VDD supply becoming high simultaneously…
Part Number: DP83TC814R-Q1 Hello Expert, My customer is considering to use DP83TC814R-Q1 under RMII mode. In this mode, TX/RX_D[3:2] and TX_CLK will be unused. Then, could we float this pins or should we need to set as PD or PU?
Thank you and best…
Part Number: DP83TC814R-Q1 Hello expert,
My customer is designing circuit using DP83TC814R-Q1. Then, we have question regarding RX/TX pin under RMII mode.
For this pin, there isn't internal pull resistor under RMII mode operation. Then, they'd like…
Part Number: DP83TC814R-Q1 Hi,
I am Piyush Nahar, Hardware Design Engineer from Minda Instruments Ltd, Pune(India).
I have query about the MDC & MDIO pin mapping/interfacing with the host controller- do we need to connect these two pins to GPIO pins…
Hi Carlos,
The 10BASE-T1L products are generally suitable for 2000+ meters. The 100BASE-T1 products have been tested with cable lengths up to 15 meters. The 1000BASE-T1 products are also generally intended for cable lengths of 15 meters or less but…
Part Number: DP83TC814R-Q1 Hello Expert, Our customer have questions about how to use DP83TC814R-Q1 in RMII application. Would you answer following questions?
Could we ignore RX_ER pin from the view point of MAC operation? I suspect that they don…
Part Number: DP83TC814R-Q1 Hello Expert,
I have questions of Datasheet's Table 8-15. Recommended 3-Level Strap Resistor Ratios for PHY address.
At first, I supposed that this table show pull-up resistor value's recommendation based on as ratio of…
Part Number: DP83TC814R-Q1 Other Parts Discussed in Thread: DP83TC811 Hi team,
I notice there are PINS named Ground Escape, what's the meaning of these PINS? can you help to explain the use scenarios and principles? thanks
