Part Number: DRA744 Other Parts Discussed in Thread: DSLR , Tool/software: We need some clarifications regarding DSLR IC (APN: 28155429) used in M&M IVI project.
Currently we are configuring both switching regulators to 3V3 and 5V outputs. We observed…
Kevin,
I could not find any other interfaces on board operating at 6.144MHz (1/4th of 24.576 SOC clock).
Could you please provide if you have any information on all the PLLs configured for above frequency by default inside the DRA742 SOC.
Part Number: DRA744 Other Parts Discussed in Thread: DRA742 Hello TI Team, We are working on TI DRA742. As part of current design we are using Pipeline VID1 (For Camera rendering) and GFX pipeline (ONLY when camera is active, For loading graphics related…
Part Number: DRA744 Other Parts Discussed in Thread: DRA750 We are connected to the NOR flash chip in SPI, and there is a probability that data cannot be read during the UBoot stage.
Before measuring the waveform, it was found that there was no waveform…
Part Number: DRA744 This if from datasheet: "All the DMA transfers are controlled by List Manager module inside VPDMA. List Manager needs to be loaded with FIRMWARE, before any DMA transfer from memory, after the VPDMA reset." What is this firmware…
Part Number: DRA744 We are getting progressive camera output from CVBS Camera sensor, of resolution 1280*960. at 30 FPS We are trying to configure VIP1 Port A to accept this frames as input. When we test currently we are not getting 30 Frames, only 3 Frames…
Part Number: DRA744 Hi Team,
Branching off of the original thread to reopen this topic. To clarify, what is the process to shift an image as mentioned in the original thread? The team has not had any success with the method described.
Additionally, can…
