Thanks for the quick reply Chris,
"also, in the future please don't copy/paste the user.
instead drag/drop the file into the reply window so that it will attach"
Sorry, thanks for the reminder!
"You should only set this up to 4x the #define USER_VOLTAGE_FILTER_POLE_Hz…
Other Parts Discussed in Thread: OPA365 Greetings,
Im trying to verify my closed current loop system using the PID_grando_controller. Current regulation seems to work fine by choosing the right PID coefficients, though i have problems verifying the…
Other Parts Discussed in Thread: TMS320F28035 , CONTROLSUITE , DRV8332 , DRV8312 Can you please answer to my following questions on TMDS2MTRPFCKIT?
1. Do you provide control software for controlling two motors seperately and PFC.
2. Is it developed…
Other Parts Discussed in Thread: MOTORWARE , DRV8312 We have been using the 8312 dev kit with instaspin motion and would like to implement this on the 80 pin chip. I noticed a couple of differences between the two and would like to better understand what…
Part Number: TMS320F28026F Other Parts Discussed in Thread: DRV8301 Hello,
I use the FOC Motorcontroller for a 48V 150A Motorcontroller for Battery Vehicles.
A lot of Hardware will be damaged by Overvoltage after the calculation of FOC is going out…
I need to run InstaSPIN without the GUI, but so far my attempts have been unsuccessful. The documentation says to run the code in the CCS debugger and set the gGUIObj.EnableFlg to 1, but this has no effect. Upon further investigation it is clear that…
1. What is the right value for USER_MOTOR_MAX_CURRENT. Is it the rated current on the motor plate, is this value rms or peak?
This is the peak current of the Iq_Ref_A command (output of speed controller, input to Iq current controller) if running in…
Here are some research ( link1 , link2 , link3 ) articles on “VARIABLE DC LINK”, a means having a DC-DC converter in-front of the source for the motor or more particularly the source to whichever H-Bridge is chosen. This is a sensor based design that…
Other Parts Discussed in Thread: DRV8301 , MOTORWARE
Hello, Yester day, one of our two DRV-69M kits died
We followed the labs in the documentation to find the motor parameters, the ADC offsets etc. and used lab5b (speed loop PI) as the beginning of…
Other Parts Discussed in Thread: DRV8312 Hi, I am using a DRV8312 Kit and am in the project PM_Sensorless.
Right now i am tuning the PID controllers for Id and Iq currents. Using the guide in the pid_grando.pdf within the control suite folder I…
