Part Number: DS100DF410EVK Other Parts Discussed in Thread: USB2ANY , DS100DF410 HI,
i'm using the USB2ANY EVK to connect the DS100DF410EVK, but the DS100DF410 GUI says "There are no USB2ANY interfaces detected", just want to make sure if i need to…
Part Number: DS100DF410EVK Other Parts Discussed in Thread: DS100DF410 Hello, This is my first post.
We are considering a 10GbE re-timer using the DS100DF410EVK. What settings can be used to reduce jitter?
The above is input eye wave.
The…
Part Number: DS100BR410EVK-4 Other Parts Discussed in Thread: DS100DF410EVK , , DS100MB203 , DS100BR410
Hi Team,
Our customer is looking for an alternative to DS100BR410EVK-4 evaluation module which is not available from our website and authorized…
Hi Martin,
Note that a USB2ANY device is required to interface between the retimer SMBus and an external PC in order to use SigCon Architect GUI. I suggest reviewing the DS1xxDF410EVM User's Guide for general instructions on SigCon Architect Installation…
Hi Patrick,
I recommend that the customer uses SigCon Architect's EEPROM tab to generate the .hex file. They can reference information about hex file format from the following application note: http://www.ti.com/lit/an/snla245/snla245.pdf
Also, they…
Hi Nat,
The reference design for the DS100RT410 is the same as the DS100DF410. Please refer to the DS100DF410EVK .
Regarding the Orcad design file, I can send that separately to you in an e-mail.
In order to obtain the IBIS-AMI model, you will need…
Other Parts Discussed in Thread: DS100RT410 , ALP , DS100DF410EVK , DS100DF410 The DS100RT410 datasheet does not detail the SMbus, instead referring to "http://smbus.org/specs/".
Does the DS100RT410 conform to SMbus specification version 1.0, 1.1 or…
Other Parts Discussed in Thread: DS100DF410 , DS100DF410EVK , DS110DF410 Dear Sir/Madam,
We are currently designing a PCB with the DS100DF410 retimers. We would like to use the available software (Analog LaunchPAD) to configure and monitor (e.g. eye…
Hi Nate,
Thanks for pointing out that the DS100RT410 only operates at a fixed frequency of 10.3125Gbps.
The DS110DF410, DS110RT410, DS125DF410, and DS125RT410 all cover a wider data rate range. The difference in parts appears to be that the DF parts…
Understanding EEPROM Programming for 10G to 12.5G Retimers_10-8-2015.pdf Hi Andrzej,
1). Normally there is a weak pull up or down on LVCMOS inputs or outputs. Please note leakage current mentioned in parametric table of the data sheet.
2). You can…
