Part Number: DS100KR401 Tool/software: The below mentioned architecture has been used with 72 Nos of 10Gbps data rate lane. Some channels having a BER - 0E0 with mode as 10G instead of 10G-KR.
0E0 has been achieved in some of the channels and attached…
Part Number: DS100KR401 Tool/software: I am using this re-driver between a FPGA & SFP-ER as per below mentioned block diagram, with maximum of 10Gbps data rate system. BER for some lane is so much high using IBERT (xilinx tool). By generating the…
Part Number: DS100KR401 Tool/software: Dear Team,
Good day to all!!!
Does DS100KR401 supports USB3.0 interface ?
Are there any recommendations/rules to be considered while interfacing a USB3.0 interface with DS100KR401.
Expecting your support at the…
Part Number: DS100KR401 Tool/software: For Standalone validation of a PCB having the Redriver(DS100KR401) with 10G_SFP module(SR)., The output of the redriver are looped at the on board connector.
In this case, the link is not established. What could…
Part Number: DS100BR410 Tool/software: Good afternoon,
What are the main performance differences between the three PNs listed in the thread title? I see that the 401 and 800 devices each have 8 channels where the 410 only has 4 and I noticed the pinouts…
Part Number: DS100KR401 Other Parts Discussed in Thread: DS100DF410 , DS125BR820 Dear Team,
Good day to all!!!
I am trying to use DS100KR401SQE/NOPB for XLPPI interface in my design. Whether it will support or not?
Are there any recommendations/rules to…
Part Number: DS100KR401 Other Parts Discussed in Thread: DS100BR111 , HI!
I need to add a re-driver supporting both 10G Ethernet and 1000-Base-X interfaces. Kindly clarify whether the below devices can be used for my application.
1.DS100KR401SQE/NOPB -…
Part Number: DS100KR401 Other Parts Discussed in Thread: DS100KR800 , DS125BR401 Looking at the register set, each channel has (3) status or observation bits, but I can’t find a description of these bits. Can you please provide an explanation of…
Part Number: DS100KR401 Other Parts Discussed in Thread: DS100DF410 I would like to connect a 40GBASE-KR4 ethernet interface from an existing switch (nearby, distance is not an issue) and out to an optical interface (Samtec Firefly https://www.samtec…
Part Number: DS100KR401 Hi Team,
Would you help review below schematic from customer? customer can not get 10G signal output from DS100KR401.
We suggest customer pull low ENSMB pin for pin mode. but still not get signal output.
TI_Repeater (002).pdf
Is…
