DS100BR410 uses the same high speed IP as DS100MB203. This EVM is available and can be ordered:
https://www.ti.com/tool/DS100MB203EVK?keyMatch=&tisearch=search-everything&usecase=partmatches
Regards,Nasser
Hello, No TI does not have a reference design / EVK for the DS100MB201. The DS100MB203 is a similar device and TI does have a reference design and EVK for this device. You can refer to the DS100MB203EVK User's Guide
Part Number: DS100MB203 I have a DS100MB203EVK board, trying to read/write to the device on I2C bus. Can you help check what slave address I should use? According to Chapter 7.6 in the datasheet ( http://www.ti.com/lit/ds/symlink/ds100mb203.pdf ), slave…
Hi TS,
I would recommend to use the DS100MB203 evaluation board and user guide for information. All the pins are the same.
www.ti.com/.../ds100mb203evk
Regards,
Lee
Hi Andrew, For a "sample" I2C setup, please refer to the DS100MB203EVK and note the connections for the ADDR[3:0] pins and SDA/SCL lines. All you will need to do is ensure that the DS125MB203 SDA/SCL have the appropriate pullup resistors and the address…
Hi Kato-san,
I connected D_IN0 to S_OUTB0 and measured the output at S_OUTA0 when only S_OUTB is enabled on our DS100MB203EVK. The DC offset voltage on the inactive S_OUTA0+/- pins are approximately 1.8V. There is no AC signal on the line because the…
