Part Number: DS110RT410 Hi,
Good Day.
I have a question regarding the datasheet of the Retimer DS110RT410. On Page 38 the Values for the register EN_IDAC_FD_CP_OV are missing (see address (Hex) A-line). There are 9 lines for the register 0xA but…
Part Number: DS110RT410 Other Parts Discussed in Thread: DPS-DONGLE-EVM , USB2ANY Hi,Team
I build a system with one EEPROM and two DS110RT410s in series.
I intend to connect the READ_EN of the first DS110RT410 to ground and the ALL_DONE of the first…
Part Number: DS110RT410 Hi Experts,
Our customer is currently designing using only two of the four channels of the DS110RT410SQE/NOPB device. We can´t find any information in the datasheet about the termination of unused channels. At the moment…
Part Number: DS110RT410 Hi,
Is it possible to DC-couple a HD3SS3414 Multiplexer to a DS110RT410 Retimer to bias the Multiplexer (as shown in the picture), if the Mux inputs and the Retimers output are AC-coupled?
Thanks,
Nicolas
Hi,
Thanks for the schematic. There was minimal information available in this schematic, but it seems like the connections make sense to me.
I have another question about your setup. If you power up, send a source 1.25 Gbps signal to the DS110RT410…
Part Number: DS110RT410 Hi,
My customer is considering DS110RT410 for 10Gpbs Ethernet. They have questions about DS110RT410.
When reading the explanation of "7.5.8 Overriding the CTLE Boost Setting" in the data sheet, the following contents are written…
Other Parts Discussed in Thread: DS110RT410 Hello,
My customer is considering DS110RT410 for 10Gpbs Ethernet. He has questions about DS110RT410.
[Q1] Do you have a sample configuration examples of recommended register settings for 10 Gigabit Ethernet…
Question [1] and [2]
The minimum setting on the DS110RT410 is not a true bypass as the signal still goes through the multi-stage linear equalizer. The steps you have outlined in [2] will keep the CTLE at a minimum value.
Question [3]
The DS125 and…
Other Parts Discussed in Thread: DS110RT410 , DS110DF410EVK Hi
We are using DS110rt410 part re-timer in our design, when i saw reference clock requirement for this part its showing 25MHZ anlog , i observed they specifically says its analog clock for…
Other Parts Discussed in Thread: DS110RT410 TI Team,
Can I get the DS110RT410 full datasheet? The website has a product brief only: http://www.ti.com/lit/ds/symlink/ds110rt410.pdf
Also, would you know if this device could address CDR and EQ functionality…
