Part Number: DS125BR401 Tool/software: Hi TIer
My customer want to use DS125BR401 in endoscope EE.
Do we have small size chip?
This size is hard to make a product which will put it in human body.
Thank you.
Hi Cickey,
Here are my comments on the layout. Note that the customer is still responsible for ensuring their design will work as intended.
U19 DS250DF810:
Make sure high-speed traces maintain 100-ohm differential impedance.
The best method to make sure…
Part Number: DS125BR401 Tool/software: Hi team!
We have a problem bringing up a PCIe link that has the DS125BR401 and a mux/demux (PI3PCIE3412A) between the Root complex and the Endpoint. T he block diagram of the path between the redriver and the Endpoint…
Part Number: DS125BR401 Team, Customer is trying to tune in the downstream direction ( PC to EP , as described in section 9.5.1 of datasheet SNLS419D ) for a PCI system. The DS125BR401 sits on a custom PCI add-on card in a PC and is connected through Molex…
Part Number: DS125BR401
Hi, we have decided to use DS125BR401 Ic part in our design but the supply current details is not mentioned in the datasheet. Can you please share the details?
Part Number: DS125BR401 Good morning,
I was reviewing and old design and found out that the power design is quite wrong. As you can see with the provided screenshot, VDD_SEL is tied to GND. According to the datasheet, tying this pin ground enables the…
Part Number: DS125BR401 Other Parts Discussed in Thread: DS110DF410 , DS100RT410 , DS100DF410 Hi team,
I am not familiar with ethernet protocol, here is an item want to know your comments.
if our part DS125BR401 could support 10Gbe-SR protocol?
Thanks
…
Part Number: DS125BR401 Hi,
In our design, we have used Jetson NX as Root Complex and Arria 10 FPGA SoC board as End Point configuration.
Hardware configurations (boot strapping) for, PCIe generation 2, x2 (lane 0 and lane1), the repeater is as follow…