Part Number: DS125BR800A Hi all：
There are two question：
1. The description of Pin 21（MODE）is not match Table 7；
2. In the Pin mode，how to set the VOD to 900mV and set the de-emphasis to -6 dB for tuning in the upstream direction (from EP to CPU…
Part Number: DS125BR800A I'd like to understand if DS125BR800A output buffer is a standalone 12.5Gbps driver or a linear amplifier? Essentially to confirm if this is a fully Linear device or not. I believe it is, but wanted to be sure. Thankyou.
Part Number: DS125BR800A Other Parts Discussed in Thread: DS125BR820 Hi,
The DS125BR800A datasheet says there are 256 levels for EQ control, but Table 3 only lists a few of the options. Is there a more complete list for all 256 settings?
The minimum…
Part Number: DS125BR800A Other Parts Discussed in Thread: DS125BR820 Is the output buffer of the DS125BR800A a standalone 12.5Gbps driver or a linear amplifier?
Hi Ryan,
In this application a single redriver would have been enough. Having two in this space in addition to all the other channel segments is the likely cause of the issues.
It sounds like we should start with the DS125BR800A since it is currently…
Other Parts Discussed in Thread: DS125BR800A , DS125BR401 Hello Team,
can all 8 channels of DS125BR800A be used independently as PCIe repeater? E.g. 4 single lanes or 2 dual lanes or one quad lane?
What is the difference compared to DS125BR401, please…
Other Parts Discussed in Thread: DS125BR800A In Table 1 of the Datasheet, the READ_EN# pin is described as needing a high-to-low transition to start the load from the External EEPROM. Later in the document - section on SMBUS Master Mode - the recommendation…
