Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: DS15BR400 Tool/software: Hi,
I am using 4-channel LVDS buffer IC DS15BR400, I am using only 2 channels.
Un-used channels should be left floating or should terminate to ground?
Regards,
Pawan
Part Number: DS15BR400 Hi TI support, I just found out that the re-driver TI part DS15BR400 is being used with TX_n is attached to pin 28 (OUT2+) and TX_p is attached to pin 27 (OUT2-). Q: Is this a problem? What affects the differential signal back to…
Hi Nasser,
Yes. I am referring to input termination. DS15BR401 and DS15BR400 both come in WQFN and TQFP packages, which implies that input termination could be a feature of either package. However, simply examining the pinout on page 8 of the DS15BR400EVK…
Part Number: DS15BR400 Hi,
I have a question about the DS15BR400.
The interface that Nokia is planning to use the DS15BR400 has AC coupling caps.
From the datasheet it’s not very clear if we need to add external bias resistors at the input of this redriver…
Part Number: DS15BR400 Hi Madam/Sir,
For DS15BR400, when it was powered up and enabled, there found the OUT+ will output ~1.8V when there is no any input at IN+ (~0V), see below. Is there any way to make OUT be synchronized with IN?
In the other way…
Part Number: DS15BR400 Hi team,
When we use only 2 channels, how much supply current shold we expect?
My customer want to use lower rating LDO to cut the cost.
Regards,
Part Number: DS15BR400 Hi Team,
My customer is thinking of using the DS15BR400TVS in a new design and had a question on backpowering. When the unit is off and there is a signal put into the input what happens? Is there any backpowering that occurs? We often…
Part Number: DS15BR400 Read the details here that allowable max junction temperature is 95C for the DS15BR400:
https://e2e.ti.com/support/interface-group/interface/f/interface-forum/945725/ds15br400-thermal-information
How was this number derived? I…
Part Number: DS15BR400 Hey team - could you look at the below?
What is the risk of connecting VDD to pins 19 and 22 of the DS15BR400TSQ/NOPB, which are marked as No Connects.
Part Number: DS15BR400 Other Parts Discussed in Thread: DS15BR401 , Is the die for the DS15BR400 same as the DS15BR401? From what I understand the only difference is the termination on the receive side.
