Part Number: DS160PR410 Dear TI Support Team,
We are using the DS160PR410RNQT as a PCIe x4 redriver between a host processor and a PCIe edge connector.
To avoid PCB trace crossovers, we have remapped only the TX channels through the redriver:
…
Part Number: DS160PR410 Other Parts Discussed in Thread: DS160PR810 Hi All,
The customer is performing analysis using the IBIS-AMI model for the DS160PR410 but was unable to generate an eye diagram. The customer is considering using the DS160PR810 IBIS…
Part Number: DS160PR410 Other Parts Discussed in Thread: DS160PR810 , Hi All,
Previously, I received a response from TI stating that if the IBIS-AMS model for the DS160PR410 was unavailable, it would be acceptable to substitute it with the IBIS-AMS…
Part Number: DS160PR410 Hello,
I have already raised a request (Request No: CS3153799 ) to obtain the IBIS model. However, my request was denied with the information that an NDA needs to be signed before the model can be shared.
I attempted to contact…
Part Number: DS160PR410 Tool/software: Dear,
Chip marking as below,
What is the meaning of it? especially number (268, 248, 288...)
PX410 TI 268 A73Z G4
PX410 TI 268 A73Z G4
PX410 TI 248 A0TQ G4
PX410 TI 288 A080 G4
PX410 TI 248 A0TQ G4…
Part Number: DS160PR410 Tool/software: Hi Sir,
Due to layout requirements, I need to swap the differenrial pair's P and N lines.
Is this permissible?
BR,
Evan Hong
Part Number: DS160PR410-Q1
Hi TI Experts:
We encountered the DS160PR410-Q1 damage during the automotive electrostatic contact discharge (connector pin) ±4kV; Two ICs out of one ECU are all damaged.
The impedance to GND of the TX pins (Pin1/2,…
Part Number: DS160PR410 Tool/software: Hello, we are Hefei Kaimeng Technology, a company that makes mobile phone memory chips. We have designed a protocol analysis board, which uses DS160PR410 to adjust and compensate signals and capture and analyze UFS4…
Part Number: DS160PR410-Q1 HI TI experts:
The DS160PR410-Q1 can be confitured with three different ways according to the datasheet, such as Pin mode, I2C controller mode (master), I2C target mode (slave).
If we want to finally confiure DS160PR410…
